2011-2014 Scion xD Rear Spoiler: Fitment, Color Codes, and Installation
This guide covers the essential compatibility details, inspection points for used parts, and installation steps for the 2011-2014 Scion xD rear spoiler.
- This spoiler only fits 2011-2014 Scion xD models due to a mid-generation body update; it will not fit 2008-2010 cars.
- Installation on a vehicle without a factory spoiler requires drilling holes in the hatch; it is critical to use a template and seal the holes to prevent rust.
- The third brake light is not part of the spoiler, which simplifies the installation process as no wiring is involved.
- Finding a used OEM spoiler in your car's factory color is the most economical option, saving hundreds of dollars in paint costs.
Symptoms of a Damaged Spoiler
Since a spoiler is a non-mechanical body part, "failure" relates to physical condition rather than function. Issues are almost always visible.
- Cracks and Physical Damage: Impacts from debris or minor collisions can cause cracks, chips, or gouges in the plastic. Pay close attention to the mounting points, as over-tightening bolts or stress over time can cause cracks to form there.
- Paint and Clear Coat Failure: A common issue is the peeling or cracking of the clear coat due to long-term sun and weather exposure. This may start as a cloudy or hazy appearance and progress to the clear layer flaking off, exposing the color coat underneath.
- Loose Fitment or Rattling: If the mounting hardware loosens or the spoiler's bolt holes are cracked, the spoiler may vibrate or rattle, especially when closing the hatch or driving at speed. This indicates the fasteners need to be tightened or the spoiler itself is damaged.
- Water Leaks: The spoiler is mounted with gaskets to seal the holes drilled into the hatch. If these gaskets degrade or were installed improperly, water can leak into the rear hatch area.
Warning: The spoiler for the 2011-2014 Scion xD is specific to these model years. The body was updated for the 2011 model year, and spoilers designed for the earlier 2008-2010 xD will not fit correctly.
Buying a Used 2011-2014 Scion xD Spoiler
Buying a used OEM spoiler is often the most cost-effective option, especially if you can find one that matches your vehicle's paint code. This saves you the significant expense of having a new part painted. Here’s what to inspect:
- Verify Compatibility: Double-check that the spoiler came from a 2011, 2012, 2013, or 2014 Scion xD. Spoilers from 2008-2010 models have different mounting points and will not align with the hatch contours.
- Inspect All Mounting Points: This is the most critical inspection. Carefully check the areas where bolts pass through the spoiler. Look for any stress cracks, fractures, or pieces broken off. A spoiler with a damaged mounting point will not be secure.
- Check for Paint and Clear Coat Condition: Examine the entire surface under bright light. Look for signs of peeling clear coat, deep scratches, or fading. Minor scuffs can be polished out, but clear coat failure requires a full repaint.
- Look for Warping or Distortion: Lay the spoiler on a flat surface to ensure it hasn't been warped by sun or heat. An OEM spoiler made from ABS plastic should hold its shape well.
- Ask for Hardware and Gaskets: Ask the seller if the original mounting bolts and gaskets are included. While you can source new hardware, having the originals makes installation easier.
Known Issues, TSBs, and Recalls
There are no recalls or Technical Service Bulletins (TSBs) issued by the NHTSA specifically for the rear spoiler on the 2011-2014 Scion xD. Any issues are generally related to cosmetic wear, such as paint degradation from sun exposure, which is common on many vehicles of this era. While some Scion models were included in a warranty extension for paint peeling, the xD was not.
Installation and Difficulty
Installation difficulty depends on whether your car already has a spoiler.
- Replacing an Existing Spoiler (Difficulty: 2/5): This is a straightforward job. It involves removing the hatch's interior trim panel, unbolting the four bolts holding the old spoiler, disconnecting any tape, and bolting the new one in its place.
- Installing a New Spoiler (Difficulty: 4/5): If your xD did not come with a spoiler, this installation is more involved because it requires drilling holes in your vehicle's hatch. OEM spoiler kits originally came with paper templates to ensure precise hole location. Without a template, you must carefully measure and mark the locations before drilling. It is crucial to treat the bare metal of the drilled holes with touch-up paint or a corrosion inhibitor to prevent rust.
Pro Tip: The third brake light (CHMSL) on the Scion xD is located at the top of the rear glass, not within the spoiler itself. This simplifies the installation process as no wiring needs to be routed through the spoiler.
| Cost Comparison | |
|---|---|
| New OEM (Pre-Painted or Primed) | $190 - $510 |
| New Aftermarket (Usually Unpainted) | $100 - $350 |
| Used OEM | $75 - $200 |
| Shop Labor (Installation) | $150 - $300 (higher end for drilling) |
OEM Part Numbers
The factory-installed spoilers were pre-painted and have part numbers that vary by color. The accessory spoiler was often sold primed. The base part number for the 2011-2014 facelift models is different from the 2008-2010 pre-facelift models.
- 2011-2014 (Facelift): PT921-52080 (Accessory Kit), 76085-52160-A0 (Super White), 76085-52160-B1 (Silver), 76085-52160-C0 (Black Metallic), 76085-52160-D1, 76085-52915 (Amethyst/Silver). Note that many of these are superseded by other numbers.
- 2008-2010 (Pre-Facelift - DO NOT USE): 76085-52150
Frequently Asked Questions (FAQ)
Can I install a 2011-2014 spoiler on an older 2008-2010 Scion xD?
No. The rear hatch and body lines were slightly changed during the 2011 model year facelift. A spoiler from a 2011-2014 model will not align correctly with the mounting points or contours of a 2008-2010 xD.
How do I find a spoiler that matches my car's paint?
The best way is to search for a used OEM spoiler by color. If you cannot find one, you can purchase a primed or used spoiler and have it painted by a professional body shop. They can use your vehicle's paint code to get an exact match.
What do I do if I'm installing a spoiler and don't have the paper template for drilling?
You can create your own template. Attach small pieces of double-sided tape or dabs of grease to the spoiler's mounting posts, carefully align the spoiler on the hatch, and press down gently. This will mark the drill locations. Measure multiple times from all angles to ensure it is perfectly centered before drilling.
Can I install a spoiler using only double-sided tape?
While some small lip spoilers can be attached with automotive-grade 3M tape, the factory Scion xD spoiler is designed to be bolted on. For safety and security, it is strongly recommended to use the bolts as intended, as a spoiler detaching at high speed is a significant road hazard.
Technical Specifications
OEM Part Numbers: PT921-52080 76085-52160-A0 76085-52160-B1 76085-52160-C0 76085-52160-D1 76085-52915
Material: ABS Plastic
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Scion xD: