2017 Nissan Rogue Rear Clip: Decoding VINs, Cameras, and Collision Repair
This guide covers the critical compatibility checks for a 2017 Nissan Rogue rear clip, focusing on build location, camera systems, and power liftgate options.
- The single most critical factor when buying a used rear clip is matching the build location: Japan (VIN starts with 'J'), USA (VIN starts with '5'), or Korea (VIN starts with 'K').
- You must also match the donor clip to your car's camera system (Around View Monitor vs. standard) and options (Power Liftgate, Sunroof).
- This is a major structural repair for professional collision centers only; it is not a DIY project. The labor cost will be the most expensive part of the job.
- Check for open recalls, especially NHTSA 17V-663 for improper rear seat frame welds, as this relates directly to the rear vehicle structure.
What is a Rear Clip and When Is It Necessary?
A rear clip is a term used in the collision repair industry for the entire back section of a car, cut from a donor vehicle at a salvage yard. This is not a bolt-on part; it's a major structural component used to repair catastrophic rear-end damage. If your 2017 Rogue has been in a severe accident, a body shop may recommend a rear clip if the frame rails are crushed, the floor pan is buckled, or multiple body panels like the quarter panels and rear body are damaged beyond repair.
The primary 'symptom' that necessitates a rear clip is visual confirmation of severe structural damage following a collision. This level of repair is far beyond replacing a bumper cover or taillight.
The Critical Buyer's Guide for a Used 2017 Rogue Rear Clip
Sourcing a used rear clip is a complex task where minor details can lead to major problems. Mismatched parts can result in thousands of dollars in extra labor and non-functional features. Before purchasing, you must verify your vehicle's exact configuration and inspect the donor clip thoroughly.
Step 1: Identify Your Rogue's DNA - The Three Critical Checks
You must match the donor clip to your vehicle's specific build. Do not proceed with a purchase until you have confirmed these three points:
- Build Location (The #1 Compatibility Trap): The 2017 Rogue was assembled in multiple locations, primarily Japan, the USA, and Korea. These versions use different wiring harnesses, sensor brackets, and even some body components. A mismatch will cause major electrical and fitment issues. To check your build location, look at the first character of your Vehicle Identification Number (VIN).
- J = Japan
- 5 = USA (Smyrna, Tennessee)
- K = Korea (Renault Samsung Motors)
- Camera System: The 2017 Rogue was available with two different rear camera systems. Ensure the donor clip has the same setup as your vehicle.
- Standard Backup Camera: A single camera for reversing.
- Around View® Monitor (AVM): This premium system uses cameras on the front, rear, and side mirrors to create a 360-degree, bird's-eye view. A clip from a car with AVM will have different wiring and camera mounting points.
- Liftgate and Sunroof Options: The internal structure and wiring differ based on these two popular options.
- Power Liftgate: Clips for models with a power liftgate include provisions for the motors, sensors, and specific latch mechanisms.
- Sunroof: If the clip includes the roof panel, it must match your car's sunroof configuration (or lack thereof).
Warning: Do not confuse the 2017 Nissan Rogue with the 2017 Nissan Rogue Sport. The Rogue Sport is a completely different, smaller vehicle, and its parts are not interchangeable with the Rogue.
Step 2: Inspecting the Donor Clip
Once you've found a potentially matching clip, a thorough physical inspection is crucial. Look for:
- Clean Cuts: The cuts made by the salvage yard should be in open areas, leaving plenty of material for the body shop to work with.
- No Hidden Damage: Inspect the frame rails, floor, and inner panels for any kinks, bends, or signs of rust that could compromise the repair.
- Intact Wiring: Check that the main wiring harnesses are not cut or damaged. Repairing a harness is time-consuming and prone to errors.
- Included Components: Clarify exactly what is included. A good clip may come with the taillights, rear bumper reinforcement, and liftgate components still attached, which can save money.
Known Issues, Recalls, and TSBs
While a rear clip itself doesn't fail, components in the rear of the 2017 Rogue have known issues and recalls that are important to be aware of during the repair process.
Recalls
- NHTSA Recall 17V-663 (Nissan ID: PC592): This critical recall addresses improper welds on the rear seat frames of some 2016-2017 Rogue models. The insufficient welds could increase the risk of injury in a crash. It is vital to ensure this recall has been performed, especially when dealing with structural repairs in the same area.
- NHTSA Recall PC934: Affecting some 2017 models, this recall is for a dash side harness connector that can corrode from water leaks, increasing the risk of a fire.
Common Problems
Power Liftgate Malfunctions: A frequent complaint among 2017 Rogue owners involves the power liftgate. Symptoms include the gate not opening, opening and then immediately closing, or stopping partway. Forum users report that causes range from a weak vehicle battery to failing latch switches or spindle motors. When buying a clip with a liftgate, test its function if possible.
Installation & Repair Overview
Warning: Rear clip replacement is a highly complex, structural repair that should only be performed by a certified and experienced collision repair technician with specialized equipment. This is not a DIY job.
- Difficulty: 5 out of 5
- Process: The procedure involves precisely measuring and cutting the damaged section from the vehicle, perfectly aligning the new clip using a frame machine, and performing hundreds of structural welds to restore the unibody's integrity.
- Calibration: If the vehicle is equipped with the Around View Monitor (360-degree camera), the system will require professional calibration after the repair to ensure the cameras are properly aligned and the view is accurate.
Cost of Replacing a 2017 Rogue Rear Clip
The cost is substantial and dominated by labor. The clip itself is just the starting point.
| Part/Service | Estimated Cost | Notes |
|---|---|---|
| Used OEM Rear Clip | $1,500 - $4,500+ | Price varies widely based on condition, included components (liftgate, lights, etc.), and salvage yard. |
| New OEM / Aftermarket Clip | Not Available | Rear clips are not sold as new parts; they are exclusively sourced from salvage vehicles. |
| Shop Labor & Materials | $7,000 - $15,000+ | This is the largest expense, covering cutting, welding, frame alignment, prep, paint, and reassembly. Severe damage can easily exceed this range. |
Technical Specifications & Component Part Numbers
A rear clip does not have a single part number. However, the individual components attached to it do. Use these numbers to verify what parts are included with your used clip or to buy them separately.
| Component | Common OEM Part Numbers | Notes |
|---|---|---|
| Rear View Camera | 28442-9TB0B, 28442-9TB0C, 28442-9TB0D, 28442-9TB3A, 28442-9TB3B, 28442-9TB4B | Different numbers for AVM vs. non-AVM systems and build locations. |
| Rear Wiper Motor | 28710-4BA0A, 28710-4BA0C | Generally more interchangeable across model years. |
| Roof Panel / Spoiler | 73112-4BA0A, 73112-4BA0D | Specific to sunroof and non-sunroof models, as well as build location. |
Frequently Asked Questions (FAQ)
How do I know if my 2017 Rogue is US, Japan, or Korea-built?
Check the very first character of your 17-digit VIN. A 'J' indicates it was built in Japan, a '5' indicates it was built in the USA, and a 'K' indicates it was built in Korea. This is the most important step for ensuring wiring and component compatibility.
Can I use a rear clip from a 2018-2020 Rogue on my 2017 Rogue?
Potentially, yes. The second-generation Rogue (T32 chassis) ran from 2014 to 2020, with a facelift in 2017. Rear body structures are often similar from 2017-2020. However, you must still perfectly match the build location, camera system, and liftgate/sunroof options. Always confirm with a professional body shop before purchasing.
Is a car repaired with a used rear clip safe to drive?
Yes, if the repair is performed correctly by a qualified collision center using proper equipment and procedures. A properly welded and aligned unibody can be as strong as the original factory structure. The key is the quality of the workmanship.
Can I reuse my original camera and liftgate motor on the replacement clip?
Yes, provided they were not damaged in the accident. Transferring your original components to the donor clip is a common practice and can be a good way to ensure electronic compatibility, assuming the mounting points on the clip are identical.
Technical Specifications
OEM Part Numbers: 28442-9TB0B 28442-9TB0C 28442-9TB0D 28442-9TB3A 28442-9TB3B 28442-9TB4B 28710-4BA0A 28710-4BA0C 73112-4BA0A 73112-4BA0D
Compatibility is determined by VIN (Build Location: Japan/USA/Korea), Camera System (Around View Monitor or Standard), Power Liftgate option, and Sunroof option.
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Nissan Rogue:
- What is a Rear Clip and When Is It Necessary?
- The Critical Buyer's Guide for a Used 2017 Rogue Rear Clip
- Step 1: Identify Your Rogue's DNA - The Three Critical Checks
- Step 2: Inspecting the Donor Clip
- Known Issues, Recalls, and TSBs
- Recalls
- Common Problems
- Installation & Repair Overview
- Cost of Replacing a 2017 Rogue Rear Clip
- Technical Specifications & Component Part Numbers
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off