Ford Bronco Engine Intake Manifold Temperature Sensor (2013-2017): Important Information
Clarifying a common point of confusion for Ford Bronco owners regarding specific model years.
- The Ford Bronco was not produced from 2013 to 2017; production stopped in 1996 and resumed in 2021.
- No parts, including the Engine Intake Manifold Temperature Sensor, exist for a 2013-2017 Ford Bronco.
- Always verify your Bronco's specific model year before purchasing any parts to ensure compatibility.
- Symptoms of a bad intake temperature sensor on other Bronco models include poor fuel economy and a check engine light.
A Note on Vehicle Year Range
The Ford Bronco was not produced between the model years 2013 and 2017. Production of the fifth generation ended in 1996, and the new sixth generation began with the 2021 model year. Therefore, no OEM or aftermarket Engine Intake Manifold Temperature Sensors exist for a 2013-2017 Ford Bronco, as the vehicle itself does not exist. Information provided below is general knowledge or pertains to the closest available model years.
Symptoms of a Failing Intake Temperature Sensor
For Bronco models of other generations, a failing intake manifold temperature sensor can cause several noticeable issues. The vehicle's computer relies on accurate temperature readings to manage the engine. When this data is incorrect, it can lead to a range of driveability problems.
Choosing the Right Part for Your Bronco
When searching for parts for a Ford Bronco, it is critical to use the correct model year. Parts for a 1996 Bronco will not fit a 2021 Bronco, and vice-versa. Always verify your vehicle's year before ordering parts.
| Part Type | Estimated Cost |
|---|---|
| New OEM (e.g., Motorcraft for 2021+ models) | $20 - $35 |
| New Aftermarket | $15 - $45 |
| Shop Labor | $50 - $100 |
Frequently Asked Questions
Why can't I find parts for my 2015 Ford Bronco?
Ford did not manufacture the Bronco between 1997 and 2020. The fifth generation concluded in 1996, and the sixth generation was introduced for the 2021 model year. Any listings for parts for a 2013-2017 Bronco are incorrect.
What are the Ford Bronco generations?
The Ford Bronco has been produced in several generations: First (1966-1977), Second (1978-1979), Third (1980-1986), Fourth (1987-1991), Fifth (1992-1996), and Sixth (2021-Present).
What is the part number for a Bronco Intake Air Temperature Sensor?
Part numbers are year-specific. For example, a sensor for a 1995 Bronco is part number F4TZ-12A697-A. A sensor for a 2021-2025 Bronco is part number DS7Z-12A697-A. There is no part number for a 2013-2017 model.
Is the Intake Manifold Temperature Sensor the same as a Mass Air Flow (MAF) sensor?
No, but they are related. Sometimes the intake air temperature sensor is integrated into the Mass Air Flow (MAF) sensor assembly. On other vehicles, it is a separate sensor screwed into the intake manifold or air duct.
Technical Specifications
OEM Part Numbers: F4TZ-12A697-A (1995) DS7Z-12A697-A (2021-2025)
This is a thermistor-type sensor that changes resistance based on the temperature of the air in the intake manifold.
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Ford Bronco: