Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.
Wrenchy
Go-Parts Garage
Expert guides for diagnosing, troubleshooting, and replacing auto parts Expert guides for diagnosing and replacing auto parts
Browse All →
🎬 Helpful Videos 🛍️ Shop This Part

Buick Verano (2012-2017) HVAC Pressure Transducer Replacement Guide

If your Verano's air conditioning is blowing warm or not working at all, a faulty HVAC pressure transducer could be the culprit.

3 minutes to read 2012-2017 Buick Verano
Difficulty
2/5
Est. Time
0.5 hrs
DIY Doable?
✅ Yes
Shop Labor
$73-$107
Safe to drive — Driving with a bad HVAC pressure transducer will not affect the engine's operation or safety, but your air conditioning will not work.
Key Takeaways
  • A bad HVAC pressure transducer is a likely cause for AC failure in a 2012-2017 Verano, often triggering a P0533 code.
  • Replacement is simple, does not require evacuating the AC system, and is accessible from under the passenger side of the car.
  • Aftermarket brands like Four Seasons offer a cost-effective and reliable alternative to the more expensive OEM part.
  • Always replace the O-ring seal with the sensor to prevent future refrigerant leaks.
The HVAC pressure transducer, also known as an AC pressure sensor, is a small but critical part of your 2012-2017 Buick Verano's air conditioning system. It acts like a safety switch and information sensor. It constantly measures the pressure of the refrigerant in the AC lines. This information is sent to your car's main computer, the Powertrain Control Module (PCM). The PCM uses this data to decide when to turn the AC compressor on and off, protecting it from damage due to pressure that is too high or too low. If this sensor fails, it can prevent the entire AC system from working correctly.

Is Your Buick Verano's AC Blowing Hot Air?

A comparison between a brand new, clean HVAC pressure transducer and a failed, corroded sensor with oil leaks.
A faulty pressure transducer (right) often shows signs of internal seal failure or corrosion, preventing the AC compressor from engaging compared to a new unit (left).

A failing HVAC pressure transducer is a common reason for air conditioning problems in the 2012-2017 Buick Verano. When this sensor sends incorrect signals, or no signal at all, the car's computer gets confused. It might prevent the AC compressor from turning on as a safety measure, leaving you with warm air blowing from the vents even on the hottest days. Other signs include an AC system that works intermittently or a check engine light on your dashboard.

Key Failure Symptoms

  • AC blows warm or hot air.
  • AC compressor clutch does not engage (no "click" sound when you turn on the AC).
  • AC works sometimes and not others.
  • Check Engine Light is on, possibly with code P0533.
  • 🎬 Watch this overview of diagnostic code P0533

Choosing the Right Aftermarket Transducer

A new aftermarket HVAC pressure transducer in its retail packaging with a replacement O-ring.
Reliable aftermarket brands like Four Seasons offer high-quality replacement sensors that often include the necessary O-ring seal.

When replacing the HVAC pressure transducer on your Verano, you don't have to buy an expensive OEM part from the dealer. Aftermarket brands offer a quality alternative at a much lower price. For this specific part, brands like Four Seasons and Global Parts (GPD) are common choices.

Brand Quality Assessment:

  • Four Seasons: Generally considered a reliable aftermarket brand for AC components. Forum discussions and reviews often point to Four Seasons as a good balance of quality and price, with some users noting their parts are sometimes identical to OEM parts, just with a different sticker.
  • Global Parts (GPD): GPD is another available option, often at a very competitive price. However, some user experiences suggest keeping expectations in line with the cost, as there are occasional reports of parts failing earlier than expected.

Pro Tip: When replacing the sensor, it's critical to also replace the small O-ring seal. Some aftermarket kits may not include it, so be sure to have one on hand to prevent refrigerant leaks. The part is located under the car on the passenger side, near the bottom of the radiator, and can be replaced without removing the front bumper.

Cost Comparison: 2012-2017 Buick Verano HVAC Pressure Transducer
Part Type Estimated Cost
New OEM (AC Delco) $45 - $175
New Aftermarket (Four Seasons, GPD) $20 - $50
Shop Labor $73 - $107

Frequently Asked Questions

The HVAC pressure transducer located on an AC line under the passenger side of a Buick Verano.
The sensor is easily accessible from underneath the vehicle on the passenger side, located on the AC line near the bottom of the radiator.
Will replacing the pressure transducer fix my Verano's AC?

If the diagnosed problem is a faulty sensor (often indicated by code P0533), then yes, replacing it should restore AC function. However, other issues like low refrigerant, a bad compressor, or electrical problems can also cause the AC to fail. A proper diagnosis is key.

🎬 Watch how to fix and troubleshoot AC pressure switch issues
Do I need to empty the refrigerant to replace this sensor?

No. The sensor port on the Verano has a Schrader valve, similar to a tire valve. This means you can unscrew the old sensor and install the new one without losing refrigerant.

Where is the HVAC pressure transducer located on my 2012-2017 Verano?

It is located on one of the AC lines under the front of the car on the passenger side. You can access it from underneath, right behind the radiator, without needing to remove the bumper cover.

🎬 See this Buick Verano AC pressure sensor replacement video
Are there any recalls for this part on my Buick Verano?

No, there are no specific recalls for the HVAC pressure transducer on the 2012-2017 Buick Verano. There was a service bulletin for some 2015 models related to the AC compressor, but not the sensor itself.

How To Fix Car AC - AC Pressure Switch P0530 P0531 P0532 P0533 P0534 P0745 P0746 P0747 P0748 P0749
How To Fix Car AC - AC Pressure Switch P0530 P0531 P0532 P0533 P0534 P0745 P0746 P0747 P0748 P0749
How to replace AC pressure sensor for 2013 Buick Verano.
How to replace AC pressure sensor for 2013 Buick Verano.
P0533 | P0533 A/C Refrigerant Pressure Sensor "A" Circuit High | code p0533,p0533 obd2
P0533 | P0533 A/C Refrigerant Pressure Sensor "A" Circuit High | code p0533,p0533 obd2

Technical Specifications

OEM Part Numbers: 13587668 13502759 13587697

3-Pin Connector

Wrenchy
Article researched & written by
Go-Parts' AI research assistant. Every article is backed by live web research, verified OEM data, and real technician knowledge — so you get accurate, up-to-date information you can trust.
Meet Wrenchy → Updated Jul 21, 2026

The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.

Year Coverage
This article covers the HVAC Pressure Transducer for:
  • Buick Verano: 201220132014201520162017
In this article
🎬 Helpful Videos
Jump to ▴

Email This Guide

We'll send you a link to this article so you can read it later or share it.

Added to cart · Part