Jeep Compass Engine Crankshaft Position Sensor Guide (2007-2022)
Solve stalling, no-start, and rough idling issues by understanding and choosing the right crankshaft position sensor for your Compass.
- Sudden engine stalling, especially when warm, is a critical symptom of a failing crankshaft sensor in a Jeep Compass.
- A 'crank, no-start' condition is a classic sign that the crankshaft position sensor has completely failed.
- For reliable, long-term performance, choose a premium aftermarket brand like NGK/NTK or Delphi, or an OEM Mopar part.
- The most common trouble code associated with this failure is P0335; always scan for codes if you suspect an issue.
Is Your Jeep Compass Stalling or Not Starting? It Could Be the Crankshaft Position Sensor
A failing crankshaft position sensor is a common problem on many vehicles, including the 2.0L and 2.4L engines found in the 2007-2022 Jeep Compass. When this small sensor starts to go bad, it can cause a range of frustrating and sometimes dangerous engine problems. Understanding the symptoms and knowing how to choose a quality replacement can save you time, money, and the headache of being stranded.
Common Symptoms of a Bad Crankshaft Sensor
The signs of a failing sensor can appear suddenly. One of the most common is the engine stalling, especially after it has warmed up. You might be driving normally, and the engine just cuts out. Other key symptoms include:
- Engine Cranks but Won't Start: This is a classic sign. The starter will turn the engine over, but it just won't fire up because the computer doesn't know when to create a spark.
- Check Engine Light: A failing sensor will often trigger the check engine light and store a diagnostic trouble code, most commonly P0335.
- Rough Idling and Misfires: The engine may shake, stumble, or run poorly because the timing for spark and fuel is off.
- Poor Acceleration: You may notice the vehicle feels sluggish or hesitates when you press the gas pedal. 🎬 See how a bad sensor causes power loss and stalling.
Known Issues: Recall S89 / NHTSA 16V-907
For some 2016 Jeep Compass models with 2.0L or 2.4L engines, a recall was issued for an improperly manufactured electrical connector for the crankshaft and camshaft sensors. This could cause an intermittent connection, leading to stalling or a no-start condition. While the recall addressed the connector, not the sensor itself, faulty wiring can damage a new sensor. If you have a 2016 model, it's worth checking if this recall service was performed.
Choosing the Right Aftermarket Crankshaft Sensor
When it comes to electronic sensors, quality matters. While a cheap part might be tempting, they are known to fail prematurely, putting you right back where you started. It's often best to stick with brands known for making OEM-quality parts.
- Premium Brands (OEM Quality): Delphi and NGK (NTK) are excellent choices. These companies are often the original equipment manufacturers for many car brands, and their aftermarket parts are made to the same high standards.
- Quality Aftermarket Brands: Standard Ignition (SMP), Walker Products, and Dorman offer a good balance of quality and price. They are reliable alternatives to premium brands and are widely available.
- Economy Brands: Brands like Crown Automotive and Global Parts are on the lower end of the price spectrum. While they can work, some owners report a shorter lifespan compared to more reputable brands.
Pro Tip: Many experienced mechanics and Jeep owners recommend using an NGK/NTK or a genuine Mopar sensor to avoid issues. Sometimes a new, low-quality aftermarket sensor can be faulty right out of the box or fail within a short period.
How Much Does a Jeep Compass Crankshaft Sensor Cost?
The cost can vary depending on the brand you choose and who does the work. The part itself is affordable, but labor can add to the total cost if you don't do it yourself.
| Item | Estimated Cost |
|---|---|
| New Aftermarket Part | $17.63 - $63.55 |
| New OEM (Mopar) Part | $55 - $90 |
| Shop Labor Cost | $100 - $200 |
| Total (Shop Installed) | $120 - $290 |
Frequently Asked Questions
Is it hard to replace the crankshaft sensor on a Jeep Compass?
The difficulty is about a 3 out of 10. The sensor itself is held by a single 10mm bolt. However, access is tight. It's located on the back of the engine block, near the transmission, and is often hidden by a heat shield. 🎬 Watch this walkthrough for replacing the sensor on 2007-2017 models. Most people find it easier to access from underneath the vehicle. Some guides suggest removing the passenger-side axle to get clear access, which makes the job much more difficult. With patience and the right tools, it is a manageable DIY job for many home mechanics.
🎬 Watch this DIY guide to fixing stalling and code P0335.Can I drive my Jeep Compass with a bad crankshaft sensor?
It is not recommended. If the sensor is failing intermittently, it can cause the engine to stall at any time, which is a serious safety risk, especially in traffic. If the sensor has failed completely, the engine will not start at all, leaving you stranded.
What's the most common code for a bad crankshaft sensor?
The most common diagnostic trouble code (DTC) is P0335, which means "Crankshaft Position Sensor 'A' Circuit Malfunction." You might also see P0336 or P0339, which point to intermittent signal issues.
Are all 2007-2022 Jeep Compass sensors the same?
For the most part, yes, especially for the common 2.0L and 2.4L "World Engines" used from 2007-2017. However, part numbers can be superseded over time. Always confirm the part fits your specific year and engine before purchasing. The later 2017+ "MP" generation Compass with the 2.4L MultiAir engine may use a different sensor.
Helpful Videos
Technical Specifications
OEM Part Numbers: 5033307AC 5033307AD 68080819AC 68080819AD 5033308AB
This is a 3-pin Hall Effect sensor. It is typically located on the rear of the engine block, near the transmission bell housing, and is secured by a single 10mm bolt.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Jeep Compass:
- 🎬 Helpful Videos
- 🛍️ Shop This Part
- Is Your Jeep Compass Stalling or Not Starting? It Could Be the Crankshaft Position Sensor
- Common Symptoms of a Bad Crankshaft Sensor
- Choosing the Right Aftermarket Crankshaft Sensor
- How Much Does a Jeep Compass Crankshaft Sensor Cost?
- Frequently Asked Questions
- 🎟️ Get 5% Off