Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.
Wrenchy
Go-Parts Garage
Expert guides for diagnosing, troubleshooting, and replacing auto parts Expert guides for diagnosing and replacing auto parts
Browse All →

Guide to the Suspension Stabilizer Bar Bushing Kit for the 2006-2010 Buick Regal

Important vehicle information you must know before searching for parts for a 2006-2010 Buick Regal.

2 minutes to read 2006-2010 Buick Regal
DIY Doable?
🔧 Shop
🚫 Do not drive — This vehicle does not exist in the North American market for the specified years.
Key Takeaways
  • The Buick Regal was not sold in North America for model years 2006, 2007, 2008, 2009, and 2010.
  • If you own a Buick sedan from this period, it is likely a Buick LaCrosse or Buick Lucerne.
  • You must verify your vehicle's actual model and year before ordering any parts to ensure they fit.
  • Parts listed for a '2006-2010 Buick Regal' in North America are incorrect and will not fit your vehicle.
The suspension stabilizer bar, also known as a sway bar, is a metal rod that connects the left and right sides of your vehicle's suspension. Its purpose is to reduce body roll when you turn, keeping the car more level and stable. The stabilizer bar is held in place by rubber or polyurethane bushings. These bushings absorb vibration and allow the bar to twist and pivot smoothly. Over time, these bushings wear out, which can affect your car's handling and comfort.

An Important Note on Your Vehicle's Model Year

If you are looking for a Suspension Stabilizer Bar Bushing Kit for a 2006, 2007, 2008, 2009, or 2010 Buick Regal in the North American market, it is crucial to know that this model was not produced for these years. The Buick Regal was discontinued in North America after the 2004 model year and did not return until the 2011 model year.

Vehicle Not Available in North America

The Buick Regal was not sold in the United States or Canada between 2005 and 2010. If you own a Buick sedan from this time period, it is most likely a Buick LaCrosse or Buick Lucerne. You must correctly identify your vehicle before purchasing any parts.

Identifying Your Buick Model

During the years the Regal was absent, Buick's primary sedans were the LaCrosse (which replaced the Regal and Century starting in 2005) and the larger Lucerne. Before ordering a stabilizer bar bushing kit, please verify your vehicle's model and year. You can usually find the model name on the trunk lid. You can also use your vehicle's VIN (Vehicle Identification Number) to confirm the exact year, make, and model.

Symptoms of Worn Stabilizer Bar Bushings (General)

While specific information for the 2006-2010 Regal is not applicable, owners of other Buick sedans like the LaCrosse may experience these common symptoms of failing sway bar bushings:

  • Clunking or rattling noises: A knocking sound from the front or rear suspension, especially when driving over bumps or uneven roads.
  • Reduced handling performance: The vehicle may feel less stable, with more body roll during turns.
  • Squeaking sounds: A creaking or squeaking noise when the suspension moves up and down.

Frequently Asked Questions

Why can't I find parts for a 2007 Buick Regal?

The Buick Regal was not manufactured for or sold in the North American market for the 2007 model year. Production in North America stopped in 2004 and started again in 2011. Any listings for parts for a "2007 Buick Regal" in this region are incorrect.

I have a Buick sedan from 2008. What model is it?

If you have a mid-size Buick sedan from 2008, it is likely a Buick LaCrosse. Buick also produced the full-size Lucerne sedan during this time. Check the emblems on your vehicle to confirm the model.

Was the Buick Regal sold in other countries from 2006-2010?

Yes, a vehicle named the Buick Regal was sold in China during this period. However, that version was based on a different platform, and its parts are not compatible with North American Buick models like the LaCrosse or Lucerne.

How do I make sure I order the right part?

First, confirm you have a Buick LaCrosse or Lucerne. Then, use your vehicle's specific year and model information when searching for parts. It is always best to double-check part compatibility with your vehicle's VIN before placing an order.

Technical Specifications

No technical specifications are available as the 2006-2010 Buick Regal was not manufactured for the North American market.

Wrenchy
Article researched & written by
Go-Parts' AI research assistant. Every article is backed by live web research, verified OEM data, and real technician knowledge — so you get accurate, up-to-date information you can trust.
Meet Wrenchy → Updated Jul 21, 2026

The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.

Year Coverage
This article covers the Suspension Stabilizer Bar Bushing Kit for:
  • Buick Regal: 20062007200820092010
In this article
An Important Note on Your Vehicle's Model Year
Jump to ▴

Email This Guide

We'll send you a link to this article so you can read it later or share it.

Added to cart · Part