Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.
Wrenchy
Go-Parts Garage
Expert guides for diagnosing, troubleshooting, and replacing auto parts Expert guides for diagnosing and replacing auto parts
Browse All →

Vehicle Identification: No 1999-2003 Dodge Charger Was Produced

If you are looking for parts for a 1999-2003 Dodge Charger, it is crucial to know that this vehicle was not manufactured, and you likely have a different Dodge model.

2 minutes to read 1999-2003 Dodge Charger
Difficulty
0/5
Est. Time
0 hrs
DIY Doable?
🔧 Shop
Safe to drive — This article addresses a vehicle identification issue, not a mechanical failure.
Key Takeaways
  • The Dodge Charger was not manufactured between the 1988 and 2005 model years.
  • A '1999 Dodge Charger' seen in media was a non-production concept car only.
  • If you own a Dodge sedan from 1999-2003, it is likely a Dodge Intrepid, Stratus, or Neon.
  • You must correctly identify your vehicle model before you can find the correct Engine Intake Manifold Temperature Sensor.
This section cannot be completed. The Engine Intake Manifold Temperature Sensor is a component that measures the temperature of the air entering the engine's intake manifold. This data is sent to the engine control unit (ECU) to adjust the air-fuel mixture and ignition timing for optimal performance and efficiency. However, since the 1999-2003 Dodge Charger does not exist as a production vehicle, no specific information or parts are available for it.

A Note on Vehicle Identification

There is a common point of confusion regarding the Dodge Charger's history. The Dodge Charger was not in production for the 1999, 2000, 2001, 2002, or 2003 model years. Production stopped after 1987 and did not resume until the 2006 model year.

The confusion often stems from two sources:

  • The 1999 Dodge Charger R/T Concept Car: Dodge created a popular, rear-wheel-drive concept car in 1999. This was a one-of-a-kind show vehicle that was never mass-produced or sold to the public.
  • The Dodge Intrepid: The full-size sedan that Dodge produced from 1998 to 2004 was the Dodge Intrepid. The Intrepid was effectively replaced by the new Dodge Charger when it was reintroduced for the 2006 model year.

Critical Information: No new aftermarket or OEM parts are available for a '1999-2003 Dodge Charger' because the vehicle does not exist. Searching for parts under this name will lead to incorrect or empty results.

What Dodge Do You Have?

If your Dodge sedan is from the 1999-2003 model years, it is most likely one of the following vehicles:

  • Dodge Intrepid (1998-2004): This was the full-size sedan of the era and is the most likely vehicle to be confused with a Charger.
  • Dodge Stratus (1995-2006): A mid-size sedan.
  • Dodge Neon (1995-2005): A compact sedan.

Please verify the model name on your vehicle's trunk lid, registration, or VIN plate before ordering parts. This will ensure you purchase the correct components for your car.


Frequently Asked Questions

Why can't I find parts for my 1999 Dodge Charger?

The Dodge Charger was not produced from 1988 to 2005. You are likely driving a different Dodge model from that era, such as the Dodge Intrepid, which was the full-size sedan at the time.

I saw a 1999 Dodge Charger. What was that?

You have likely seen the 1999 Dodge Charger R/T Concept car. This was a design study and show car that was never sold to consumers and shared few parts with any production vehicle.

So, what car do I have?

If you own a 4-door Dodge sedan from the years 1999-2003, it is probably a Dodge Intrepid, Stratus, or Neon. Check the emblems on the vehicle or your ownership documents to confirm the correct model.

Was there a recall for the Engine Intake Manifold Temperature Sensor on the 1999 Dodge Charger?

No. Since the vehicle was never produced, there are no recalls, Technical Service Bulletins (TSBs), or known issues associated with a 1999-2003 Dodge Charger.

Technical Specifications

Not applicable. The 1999-2003 Dodge Charger does not exist as a production vehicle.

Wrenchy
Article researched & written by
Go-Parts' AI research assistant. Every article is backed by live web research, verified OEM data, and real technician knowledge — so you get accurate, up-to-date information you can trust.
Meet Wrenchy → Updated Jul 21, 2026

The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.

Year Coverage
This article covers the Engine Intake Manifold Temperature Sensor for:
  • Dodge Charger: 19992000200120022003
In this article
A Note on Vehicle Identification
Jump to ▴

Email This Guide

We'll send you a link to this article so you can read it later or share it.

Added to cart · Part