Guide to the Engine Intake Manifold Temperature Sensor for the 1994-1998 Dodge Charger
Addressing a common point of confusion regarding Dodge Charger model years and parts availability.
- The Dodge Charger was not produced from 1994 to 1998.
- Production of the Charger stopped in 1987 and did not resume until the 2006 model year.
- No aftermarket or OEM parts exist for a 1994-1998 Dodge Charger.
- Verify your vehicle's model and year to ensure you are searching for the correct parts.
A Note on Dodge Charger Production Years
When searching for parts for a 1994-1998 Dodge Charger, it is important to understand the production history of this vehicle. The Dodge Charger was not manufactured between 1994 and 1998. Production of the L-body Charger ended in 1987. The Charger nameplate was then on a long hiatus until it was reintroduced to the market for the 2006 model year as a four-door sedan. There was a production gap of nearly 20 years.
Because the 1994-1998 Dodge Charger does not exist, no OEM or aftermarket parts, including an Engine Intake Manifold Temperature Sensor, are made for this specific year range and model combination.
Identifying Your Vehicle
If you own a Dodge from the mid-1990s and need an Intake Air Temperature sensor, it is likely a different model. Common Dodge cars from that era include the Dodge Neon, Stratus, Intrepid, and Avenger. Please double-check the model name on your vehicle's trunk lid or your ownership documents to ensure you are searching for the correct part.
General Information on Intake Air Temperature Sensors
For Dodge vehicles of that period that *do* exist, a failing IAT sensor can cause several issues. Since the sensor helps the engine computer decide how much fuel to inject, a bad sensor can send incorrect information. This can lead to:
- Poor fuel economy
- Rough idling
- Hesitation during acceleration
- Failed emissions tests
- Check Engine Light illumination
Frequently Asked Questions
Why can't I find parts for my 1996 Dodge Charger?
You cannot find parts because Dodge did not produce a vehicle named the Charger in 1996. The model was out of production from 1987 until 2006. You may have a different Dodge model, such as an Intrepid or Stratus.
What were the different generations of the Dodge Charger?
The Dodge Charger has had several distinct generations: 1966-1978 (B-body), 1982-1987 (L-body), and 2006-2023 (LX/LD platform), with a new generation starting in 2024. There was a significant gap in production between 1987 and 2006.
Was there a concept car or prototype during the 1990s?
A four-door Dodge Charger concept car was shown in 1999, but it did not enter production at that time and shared little with the model that eventually launched for the 2006 model year. No prototypes or concepts are known for the 1994-1998 timeframe.
What should I do if my mechanic says I need a part for a 1994-1998 Charger?
It is best to clarify the vehicle's model year and name with your mechanic. There may have been a misunderstanding. Providing them with the Vehicle Identification Number (VIN) is the most accurate way to identify the vehicle and find the correct parts.
Technical Specifications
Not applicable for the specified year range.
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Dodge Charger: