Automatic Transmission Mount for 1986-1990 Dodge Challenger: A Guide to a Non-Existent Part
Searching for a transmission mount for a 1986-1990 Challenger? Here's what you need to know about this vehicle's production history.
- The Dodge Challenger was not manufactured between 1986 and 1990.
- No new, used, OEM, or aftermarket parts exist for a 1986-1990 Dodge Challenger.
- It is essential to verify your vehicle's actual model and year using the VIN.
- Vehicles from this era might be a different Dodge model, like a Daytona or Conquest.
A Note on Dodge Challenger Production Years
If you are looking for an automatic transmission mount for a 1986, 1987, 1988, 1989, or 1990 Dodge Challenger, you will not find any available parts. This is because the Dodge Challenger was not in production during this period. The second generation of the Challenger ended in 1983, and the third generation did not begin until the 2008 model year.
Verify Your Vehicle Model
It is crucial to double-check the year and model of your vehicle. You may have a different Dodge model from that era, such as a Dodge Daytona or Dodge Conquest, which were in production during the late 1980s. These vehicles have their own specific parts that are not interchangeable with the Challenger. Check the VIN (Vehicle Identification Number) on your dashboard or driver's side door jamb to confirm your exact model and year.
Dodge Challenger Production Gaps
The Dodge Challenger has been produced in three distinct generations, with significant breaks in production between them:
- First Generation: 1970–1974
- Second Generation: 1978–1983 (This was a rebadged Mitsubishi Galant Lambda).
- Third Generation: 2008–2023
As the timeline shows, no Dodge Challenger was manufactured from 1984 to 2007. Therefore, no OEM or aftermarket parts, including automatic transmission mounts, exist for the 1986-1990 model years.
Frequently Asked Questions
Why can't I find a transmission mount for my 1987 Dodge Challenger?
No parts are listed because Dodge did not manufacture the Challenger in 1987. Production stopped in 1983 and did not resume until 2008.
I have a Dodge coupe from 1988. What model could it be if not a Challenger?
During that time, Dodge produced other sporty coupes like the Dodge Daytona and the Dodge Conquest (a captive import, similar to the second-gen Challenger). It is highly likely you own one of these models. Verify your VIN to be certain.
Are there any recalls or TSBs for a 1986-1990 Challenger transmission mount?
No, there are no recalls or Technical Service Bulletins (TSBs) for this part, as the vehicle itself was not produced in those years.
Where can I find parts for a second-generation (1978-1983) Challenger?
Parts for the second-generation Challenger, which was based on the Mitsubishi Galant Lambda, can sometimes be found through specialty classic car part suppliers or forums dedicated to captive import vehicles of that era. These parts are not compatible with any other Challenger generation.
Technical Specifications
Not applicable. The Dodge Challenger was not in production during the 1986-1990 model years.
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Dodge Challenger: