Ford Granada 1975-1982 Windshield Washer Pump Replacement Guide
Keeping your view clear in your classic Granada is simple—here's what you need to know about replacing your washer pump.
- A failed washer pump is the most common reason for the system not working on a Granada.
- Diagnosis is simple: check for pump noise, power at the connector, and clogged lines/nozzles.
- Replacement is a beginner-level DIY task that takes under 30 minutes.
- Aftermarket pumps from brands like Trico are the only practical and cost-effective option, as original Ford parts are rare and expensive.
Is Your Granada's Washer Pump Failing?
For a car like the 1975-1982 Ford Granada, the windshield washer system is straightforward. When it stops working, the pump is a common culprit. Before you replace it, check two things: make sure you have fluid in the reservoir and check the system's fuse. If those are good, look for these symptoms to confirm the pump has failed.
Diagnosing the Problem
- No Sound, No Fluid: If you press the washer button and hear nothing from the pump, it has likely failed or is not receiving power. You can use a test light on the pump's electrical connector to see if it's getting power when the switch is activated.
- Pump Hum, No Fluid: If you can hear the pump motor humming but no fluid sprays out, the pump's internal impeller might be broken. This can also be caused by clogged lines, blocked nozzles, or a leak in the hoses. Before replacing the pump, disconnect the hose from the pump's outlet and activate it. If fluid comes out, the problem is a clog downstream.
- Weak or Uneven Spray: A dying pump may lose the pressure needed to spray fluid effectively across the windshield. This could also point to partially clogged nozzles, so it's wise to clean them with a small pin first.
Choosing the Right Aftermarket Pump
Finding an original Ford (Motorcraft) washer pump for a Granada is nearly impossible. If you do find a New Old Stock (NOS) part, expect it to be very expensive. For most owners, a new aftermarket pump is the most practical and affordable solution.
For this vehicle, Trico is a common aftermarket brand. Trico has been in the windshield wiper business since 1917 and produces parts designed to match original equipment (OE) specifications for fit and function. These pumps are engineered for easy installation without needing modifications. Given the age of the Granada, a reliable aftermarket pump from a well-known manufacturer like Trico is a solid choice that will restore function to your washer system.
Cost of Windshield Washer Pump for 1975-1982 Ford Granada
| Part Type | Typical Cost |
|---|---|
| New Aftermarket (Trico) | $23.94 |
| New OEM (Motorcraft NOS) | $180+ (if found) |
| Shop Labor for Installation | $50 - $100 |
Frequently Asked Questions
Is it difficult to replace the washer pump on my Granada?
No, this is a very easy job for a DIY mechanic. The pump is typically located on the outside of the washer fluid reservoir in the engine bay. The process involves unplugging the electrical connector, pulling off the fluid hose, and pulling the old pump out of the reservoir. The new one just pushes into place. The whole job usually takes less than 30 minutes.
Do I need any special tools?
You shouldn't need any special tools. A pair of pliers to help with the hose clamp and maybe a flathead screwdriver is usually all that's required. Have a bucket ready to catch any fluid left in the reservoir when you pull the old pump out.
Are there any recalls on the Ford Granada washer pump?
No, there are no recalls or common Technical Service Bulletins (TSBs) from Ford or the NHTSA regarding the windshield washer pump for the 1975-1982 Ford Granada.
What if I replace the pump and it still doesn't work?
If a new pump doesn't solve the issue, the problem is likely electrical or a blockage. First, confirm the pump is getting 12-volt power when the switch is pressed. If there's power, check for clogs by blowing compressed air back through the nozzles and hoses. If there's no power, check the fuse again, the switch itself, and the wiring between the switch and the pump.
Technical Specifications
OEM Part Numbers: D5BZ-17664-A
12V Electric Pump, typically a press-fit installation into the washer fluid reservoir.
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.