2018-2021 Kia Stinger Overhead Console: Solving Light, Sunroof, and Rattle Issues
This guide covers common failure symptoms, replacement costs, and crucial compatibility checks for the 2018-2021 Kia Stinger overhead console.
- Compatibility is critical. You must match the console to your vehicle's specific options: sunroof and Lane Keep Assist.
- Verify the part number and color code (e.g., AYK) before purchasing a replacement.
- Common failures include non-working lights, a faulty sunroof switch, and a broken sunglass holder latch (TSB #BOD314).
- Replacement is a simple DIY task that typically takes less than 30 minutes with basic trim tools.
Key Variants and Compatibility
The single most important factor when replacing a 2018-2021 Kia Stinger overhead console is matching it to your car's exact features. Unlike many parts, these consoles have several variations that are not interchangeable. Ordering the wrong one will result in features not working.
Warning: Before purchasing, you must verify if your Stinger is equipped with a sunroof and Lane Keep Assist. This specific part, 92810-J5000-AYK, is for non-GT trims (Base, Premium, GT-Line) that have both a sunroof and Lane Keep Assist. The 'AYK' suffix indicates a specific dark interior color. Always match your old part number to the new one.
Here are some other known part numbers and their configurations:
| Part Number | Configuration | Common Trims |
|---|---|---|
| 92810-J5000-AYK | With Sunroof, With Lane Assist | Base, Premium, GT-Line |
| 92810-J5000-WK | With Sunroof, With GT package | GT, GT1, GT2 |
| 92800-J5000-AYK | Without Sunroof, Without Lane Assist | Base |
| 92800-J5000-CKL | Without Sunroof, With Lane Assist | Base, Premium, GT-Line |
| 92800-J5000-WK | Without Sunroof, With GT package | GT, GT1, GT2 |
Common Symptoms of a Failing Overhead Console
Failures in the overhead console are typically electrical or mechanical. Here are the most common symptoms owners experience:
- Inoperative Map or Dome Lights: Individual lights or all lights in the console may fail to turn on. This can be due to a burnt-out bulb (if not LED), a bad switch, or a problem with the internal circuit board.
- Sunroof Switch Failure: The sunroof may not open, close, or tilt, or it may operate intermittently. If the sunroof motor is known to be good, the switch inside the console is a likely culprit.
- Unresponsive Buttons: The Lane Keep Assist or SOS buttons may not respond when pressed.
- Broken Sunglass Holder: The latch for the sunglass holder is a common point of failure. Kia has issued a Technical Service Bulletin (TSB #BOD314) for a repair procedure on the latch mechanism.
- Rattling or Buzzing Noises: Loose internal components or the console housing itself can cause persistent rattling from the headliner area, a common complaint among Stinger owners.
Buying a Used 2018-2021 Stinger Overhead Console: What to Check
Buying a used OEM console is a cost-effective way to fix your issues, but careful inspection is key. Here’s what to look for:
1. Verify Your EXACT Options
Before you even start shopping, look at your current console. Do you have a sunroof switch? Do you have a Lane Keep Assist button? Is your interior black or beige? You must buy a console that matches your car's factory options. A console from a car without a sunroof will not have the switch or the wiring for it.
2. Match the Part Number and Color Code
The best way to ensure compatibility is to match the part number exactly. The part number is printed on a sticker on the top of the console housing. You must remove your existing console to see it. Pay special attention to the suffix (e.g., AYK, WK, CKL), as this often denotes the color and feature set.
Pro Tip: If you can't remove your console first, call a Kia dealer parts department with your VIN. They can tell you the exact part number for your specific vehicle, which you can then use to search for a used part.
3. Physical Inspection Checklist
When you have the used part in hand, or are looking at high-quality photos online, check the following:
- Buttons: Press every button. They should have a solid, tactile click with no sticking.
- Sunglass Holder: Open and close the sunglass holder several times. Make sure the latch catches securely and releases smoothly. Check for signs of stress or cracks near the hinge, a known weak point.
- Mounting Points: Inspect all plastic tabs and screw holes. Ensure none are cracked, broken, or stressed. Broken tabs will lead to a poor fit and rattles.
- Lens Covers: Check the map light lenses for cracks, hazing, or broken tabs.
- Wiring Connectors: Look at the electrical connector ports on the back. Make sure there are no bent pins or signs of corrosion or heat damage.
Known Issues, Recalls, and Technical Service Bulletins (TSBs)
While there are no recalls specifically for the overhead console itself, several TSBs and related issues are relevant:
- TSB #BOD314: Addresses a faulty sunglass door latch that won't stay closed. The procedure 🎬 Watch: How to fix this common sunglass latch issue involves replacing the latch mechanism.
- TSB #BOD317: Pertains to reducing headliner noise on 2022+ models but the techniques for applying anti-noise tape can be relevant for earlier models experiencing rattles from the console area.
- Sunroof Reset Procedure: If your sunroof is acting up after a battery disconnect or replacement, it may just need to be reset. This procedure is done using the overhead console switch and can often fix problems without replacing parts.
- General Rattles: The Kia Stinger is known for interior rattles, and the overhead console and sunroof area are common sources. Owners on forums often use felt tape or foam strips around the console edges during installation to dampen vibrations.
No recalls for the 2018-2021 Kia Stinger directly involve the overhead console, though numerous recalls exist for other systems like the engine, fuel pump, and brakes.
Cost Comparison: New vs. Used
Prices can vary, but here is a general cost expectation:
| Part Type | Estimated Cost | Notes |
|---|---|---|
| New OEM | $240 - $360 | Price varies by dealer and specific part number. |
| New Aftermarket | $50 - $150 | Generic or universal options are rare and not recommended due to feature integration. |
| Used OEM | $75 - $200 | Commonly found on eBay and at auto recyclers. Price depends on condition and rarity of the specific configuration. |
| Shop Labor | $75 - $150 | Typically takes 0.5 to 1.0 hour of labor. |
Replacement Overview
Replacing the overhead console is a straightforward job suitable for most DIYers.
- Difficulty: 1/5 (Easy)
- Time: 15-30 minutes
- Tools: Plastic trim removal tool, Phillips head screwdriver.
Basic Steps:
- Using a plastic trim tool, gently pry down the front edge (closest to the windshield) of the console.
- Once the front clips are released, pull the console down and slightly forward to release the rear clips.
- Let the console hang by its wiring. Locate the electrical connector(s) and depress the release tab to disconnect them.
- Some models may have additional screws holding the console in place, which would need to be removed after prying off a lens or cover.
- Installation is the reverse of removal. Connect the wiring, align the clips, and press firmly upwards until it snaps into place.
Pro Tip: Before starting, it's a good practice to disconnect the negative battery terminal to prevent any accidental short circuits. If you do, you may need to perform the sunroof reset procedure after reconnecting it.
Frequently Asked Questions (FAQ)
Can I install a console with a sunroof switch in my car that doesn't have a sunroof?
You can physically install it, but the sunroof switch will be non-functional as your vehicle lacks the necessary wiring, motor, and sunroof mechanism.
My sunroof stopped working after I replaced the battery. Is my console broken?
Probably not. The sunroof system needs to be reset after a power loss. This involves a series of presses and holds of the sunroof switch. The procedure can be found in the owner's manual or online.
What does the 'AYK' at the end of the part number 92810-J5000-AYK mean?
This is Kia's internal code for the color and material finish. 'AYK' typically refers to the standard black/dark gray interior color for non-GT models. It is crucial to match this code to ensure the new console's color matches your headliner and other interior trim.
The sunglass holder on my console won't stay closed. Do I need to replace the whole unit?
Not necessarily. This is a very common problem, and Kia has a TSB (BOD314) for it. The latch mechanism can be replaced separately without having to buy an entire new console.
Helpful Videos
Technical Specifications
OEM Part Numbers: 92810-J5000-AYK 92810-J5000AYK 92810J5000AYK 92810-J5000-WK 92800-J5000-AYK 92800-J5000-CKL 92800-J5000-WK
Varies by configuration (with/without sunroof, with/without Lane Keep Assist, trim level)
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Kia Stinger:
- 🎬 Helpful Videos
- 🛍️ Shop This Part
- Key Variants and Compatibility
- Common Symptoms of a Failing Overhead Console
- Buying a Used 2018-2021 Stinger Overhead Console: What to Check
- 1. Verify Your EXACT Options
- 2. Match the Part Number and Color Code
- 3. Physical Inspection Checklist
- Known Issues, Recalls, and Technical Service Bulletins (TSBs)
- Cost Comparison: New vs. Used
- Replacement Overview
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off