2023-2026 Honda CR-V Overhead Console: Decoding Part Numbers, Colors, and Features
This guide details the different overhead console versions for the 2023-2026 CR-V, helping you find the exact match for your trim level and options.
- The most critical factor when buying is matching the part number to your CR-V's trim: 83250-3T0-A21ZA is Black for Hybrids with a sunroof, while 83250-3T0-A21ZB is Gray for non-Hybrids without a sunroof.
- Failure is uncommon; typical problems are non-working switches or a broken sunglass holder latch.
- Replacement is a very easy DIY task, requiring only the removal of two screws inside the sunglass holder and unclipping the unit.
- No specific recalls or TSBs have been issued for the overhead console on this generation CR-V.
Variant Differences: Which Console Fits Your CR-V?
Finding the correct overhead console for your 2023-2026 Honda CR-V requires matching it to your vehicle's specific trim and options. The two primary variants are distinguished by color and the features they support, mainly the presence of a sunroof which is common on hybrid models.
Warning: Always verify the part number before purchasing. Installing a console designed for a different feature set (e.g., a non-sunroof console in a vehicle with a sunroof) will result in non-functional switches.
| Part Number | Color | Key Features & Fitment |
|---|---|---|
| 83250-3T0-A21ZA | Black (*NH900L*) | Typically found on Hybrid models (Sport, Sport-L, Sport Touring) equipped with a sunroof. |
| 83250-3T0-A21ZB | Gray (*NH882L*) | Typically found on non-Hybrid models (LX, EX, EX-L) and models without a sunroof. |
Symptoms of a Failing Overhead Console
Since the overhead console is a relatively simple component with few moving parts, failures are uncommon on a newer vehicle like the 2023-2026 CR-V. However, when problems do occur, they are typically straightforward to diagnose.
- Inoperative Map or Dome Lights: The individual map lights or the main dome light fail to turn on when the button is pressed. If all lights are out, check the fuse first. If only one light is out, the issue is likely within the console's circuitry or the LED itself.
- Sunroof Switch Failure: The sunroof does not open, close, or tilt when the switch is operated. If the sunroof motor makes no noise, the switch itself may be faulty.
- Broken Sunglass Holder: The latch for the sunglass storage door may break, causing it to no longer stay closed. This is a physical failure of the plastic mechanism.
- Flickering Interior Lights: While flickering lights can sometimes be caused by a fault within the console, it is more often a symptom of a wider electrical system issue, such as a failing battery or alternator.
Buying a Used Overhead Console
Purchasing a used OEM overhead console is a cost-effective way to replace a damaged or faulty unit. Because this is not a high-wear mechanical part, a used console from a low-mileage vehicle is often just as good as a new one. Here’s what to check before you buy:
- Verify the Part Number: This is the most critical step. Make sure the part number (e.g., 83250-3T0-A21ZA) matches the color and features of your CR-V. A seller should be able to provide this information.
- Inspect All Mounting Points: The console is held in by a combination of screws and plastic clips. Check photos carefully to ensure all clip housings and screw tabs are intact and not cracked. Broken clips can lead to a loose, rattling console.
- Check the Lens Covers: Ensure the plastic lenses for the map lights are not cracked, hazed, or heavily scratched.
- Examine the Switches: Look for excessive wear on the switch graphics. While you likely can't test them electrically, confirm they physically depress and return smoothly.
- Look for Scratches and Damage: Inspect the main body of the console for deep scratches or discoloration from sun exposure, although this is less of a concern on a late-model part.
Replacement Difficulty: 1/5 (Very Easy)
Replacing the overhead console is a simple DIY job that typically takes less than 15 minutes and requires only basic tools.
- Open the Sunglass Holder: Open the sunglass storage compartment completely.
- Remove the Screws: Inside the compartment, you will find two Phillips head screws. Remove them.
- Pry the Console Down: Using a plastic trim removal tool or your fingers, gently pry downwards on the edge of the console closest to the windshield. It is held in by several clips that will release as you pull down.
- Disconnect Electrical Connectors: Lower the console to access the electrical connectors on the back. Press the release tab on each connector and pull it out. There are typically three connectors.
- Installation: Installation is the reverse of removal. Connect the electrical harnesses, align the console, and press it firmly upwards until the clips snap into place. Reinstall the two screws inside the sunglass holder.
Pro Tip: When prying the console down, start from the front (windshield side) and work your way back. Using a plastic trim tool prevents scratching the headliner or the console itself.
Cost Comparison
The overhead console is a part where buying used OEM offers significant savings with very little risk.
| Part Source | Estimated Cost |
|---|---|
| New OEM (Dealer) | $115 - $125 |
| Used OEM (Recycled) | $75 - $150 |
| New Aftermarket | Not Available |
| Shop Labor | $60 - $80 |
Frequently Asked Questions (FAQ)
Can I install a console with a sunroof switch in my CR-V that doesn't have a sunroof?
While it might physically fit, the sunroof switch will be non-functional and may cause errors with the vehicle's body control module. It is essential to buy the console that matches your vehicle's factory options.
My map lights are flickering. Is the console bad?
Not necessarily. Flickering across multiple interior or exterior lights is often a sign of a weak battery, a bad ground connection, or a failing alternator. Have your vehicle's charging system tested before replacing the console.
Why is it important to match the color code (*NH900L* for Black, *NH882L* for Gray)?
Honda's Black and Gray interior plastics can look similar in photos online. Using the specific color code ensures the replacement console perfectly matches the rest of your interior trim for a factory appearance.
Is it difficult to swap the individual switches instead of the whole console?
It is possible, but generally not recommended. The small plastic tabs holding the switches in place can be brittle and may break during removal. Replacing the entire console assembly is often faster, easier, and reduces the risk of damaging the components.
Technical Specifications
OEM Part Numbers: 83250-3T0-A21ZA 83250-3T0-A21ZB
Houses switches for map lights, dome light, sunroof, and HondaLink SOS button (trim dependent). Includes sunglass storage compartment.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Honda CR-V: