2021-2024 Genesis GV80 Dash Cup Holder: A Guide to Trim Matching and Replacement
This guide explains how to identify the correct woodgrain or standard trim cup holder for your GV80, diagnose common failures, and replace it without damaging your dash.
- The most critical step is to correctly identify your vehicle's trim: without woodgrain, with woodgrain Type 1, or with woodgrain Type 2.
- Failure is always mechanical (sticking door, broken latch); it will not trigger any warning lights.
- No recalls or TSBs have been issued for this specific part, so failures are addressed on a case-by-case basis.
- Replacement is a feasible DIY task requiring plastic trim tools to avoid scratching the center console.
Variant Differences: The Critical Trim Match
The single most important factor when replacing the instrument panel cup holder on a 2021-2024 Genesis GV80 is matching it to your vehicle's interior trim. Genesis used different assemblies depending on whether the vehicle was equipped with woodgrain trim. Ordering the wrong part will result in a mismatched and ill-fitting component.
Warning: Before purchasing, you must visually inspect your current cup holder and surrounding trim to identify which version you have. There are at least three known variations.
| Trim Type | Known OEM Part Number(s) | Description |
|---|---|---|
| Without Woodgrain | 84670-T6000-LA1 | This version has a standard finish, typically a metallic or matte black look, designed to match the non-woodgrain interior console trim. |
| With Woodgrain (Type 1) | 84670-T6400-LR9 | This version features a specific woodgrain pattern on the retractable door. |
| With Woodgrain (Type 2) | 84670-T6400-LR7 | This assembly has a different woodgrain finish. The distinction between Type 1 and Type 2 is subtle but crucial for a perfect match. |
Because dealer part descriptions simply note "Order by description," the best practice is to provide your vehicle's VIN to a dealership parts department to get the exact part number for your specific build. When buying used, carefully compare photos of the part to your existing unit.
Common Symptoms of a Failing Cup Holder
Failure of this part is almost always mechanical. You will not see any dashboard warning lights or receive error codes. Look for these physical symptoms:
- Door is Stuck Closed: The most common issue is the push-to-open latch failing. You press the door, but it doesn't spring open. This can be caused by a broken internal spring or a jammed latch, sometimes from spilled liquids gumming up the mechanism.
- Door Won't Stay Closed: The opposite problem can also occur, where the latch no longer catches, and the door remains permanently open or slides open during driving.
- Slow or Gritty Operation: If the door opens or closes slowly, makes a grinding noise, or feels rough, it's a sign that the internal sliding mechanism is failing or obstructed by debris.
- Cosmetic Damage: The faceplate of the cup holder can become scratched, chipped, or the woodgrain finish may start to delaminate, detracting from the interior's appearance.
Buying a Used 2021-2024 GV80 Instrument Panel Cup Holder
A used OEM cup holder is an excellent way to save money, especially given the high cost of new woodgrain units. Since there are no known aftermarket replacements, a recycled OEM part is often the only alternative to an expensive new one. Here’s what to check.
Step 1: Confirm the Exact Trim Match
This cannot be overstated. Get high-resolution photos of the used part from the seller. Compare the color, grain pattern (if wood), and finish to the one in your vehicle under good lighting. Do not rely on part numbers alone if you are not 100% certain, as sellers can make mistakes.
Step 2: Physical Inspection Checklist
- Test the Mechanism: Ask the seller to send a video of them pressing the door to show that it opens and closes smoothly. It should pop open with a gentle push and latch securely closed with another push.
- Inspect the Faceplate: Look for deep scratches, scuffs, or any signs of the finish peeling, especially around the edges. Minor surface scratches may be acceptable, but significant damage defeats the purpose of a cosmetic replacement.
- Check All Mounting Tabs: The assembly is held in place by plastic tabs and screw holes. Ensure none of these are cracked or broken. A broken tab can lead to a loose fit and rattling in the console.
- Look for Stickiness: Check for any sticky residue from spilled drinks, particularly around the seams of the door. This can indicate potential future problems with the mechanism.
Replacement Overview & Difficulty
Replacing the instrument panel cup holder is a manageable DIY job for those comfortable with interior trim work. No specialized mechanical knowledge is required, but patience and care are essential to avoid damaging the expensive console trim.
- Difficulty Rating: 2 out of 5
- Estimated Time: 0.5 - 1.0 hours
- Tools Required: Plastic trim removal tools, Phillips head screwdriver.
Pro Tip: Always use plastic pry tools, not a screwdriver, to remove interior trim panels. The plastic tools are designed to pop the clips loose without scratching or gouging the soft-touch plastics and fine finishes in the GV80's interior.
The general process involves carefully prying up the center console trim piece that surrounds the cup holder and gear selector. Once the trim is lifted, you will have access to the screws that secure the cup holder assembly. From there, it's a simple matter of unscrewing the old unit, disconnecting any small electrical connector if present (for illumination), and installing the new one.
Known Issues, TSBs, and Recalls
As of mid-2026, there are no specific recalls or Technical Service Bulletins (TSBs) from Genesis or the NHTSA related to the failure of the instrument panel cup holder assembly for the 2021-2024 GV80. While the GV80 has had recalls for other components like the fuel system and instrument panel *software*, these do not pertain to the physical cup holder mechanism.
Cost Comparison
The price for this part varies dramatically based on the trim level. The woodgrain versions are significantly more expensive than the standard finish.
| Part Type | Estimated Cost |
|---|---|
| New OEM (Without Woodgrain) | $300 - $350 |
| New OEM (With Woodgrain) | $300 - $720+ |
| Used OEM | $150 - $450 |
| New Aftermarket | Not Available |
| Shop Labor | $75 - $150 |
Frequently Asked Questions (FAQ)
How do I know for sure which cup holder my GV80 needs?
The most reliable method is to call a Genesis dealership parts department with your Vehicle Identification Number (VIN). They can look up the exact part number that your vehicle was built with. The second-best method is to carefully remove the surrounding trim to access and read the part number on a sticker on your existing cup holder assembly.
Can I just fix my broken cup holder instead of replacing it?
It is sometimes possible, but often difficult. The internal latch and spring mechanisms are small, complex, and not sold separately. If the issue is simply a dislodged spring, you might be able to disassemble the unit and reseat it. However, if any of the small plastic components of the latch are broken, a full replacement is the only practical solution.
Why is the 'Type 2' woodgrain version so much more expensive?
The price difference, with some new OEM units listed for over $700, is likely due to the specific manufacturing process, materials used for that particular wood finish, or lower production numbers compared to other trim types. This makes finding a good-condition used part for these models especially valuable.
Will a cup holder from a Genesis G80 fit my GV80?
No. While they may look similar and use similar mechanisms, the center consoles of the G80 and GV80 are different shapes. You must use a cup holder assembly specifically designed for the 2021-2024 GV80 to ensure proper fitment.
Technical Specifications
OEM Part Numbers: 84670-T6000-LA1 84670-T6400-LR7 84670-T6400-LR9
Push-to-open/close mechanical latch system. Integrated into the center console assembly.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Genesis GV80:
- 🛍️ Shop This Part
- Variant Differences: The Critical Trim Match
- Common Symptoms of a Failing Cup Holder
- Buying a Used 2021-2024 GV80 Instrument Panel Cup Holder
- Step 1: Confirm the Exact Trim Match
- Step 2: Physical Inspection Checklist
- Replacement Overview & Difficulty
- Known Issues, TSBs, and Recalls
- Cost Comparison
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off