2023-2024 Maserati Grecale Fender Support Bracket: Collision Repair and Part Guide
This guide covers how to identify a damaged fender support bracket on a Maserati Grecale and what to inspect when buying a used OEM replacement for collision repair.
- Failure of this bracket is always due to collision damage, not from a factory defect or normal wear.
- The part is side-specific. Part number 670160091 is for the left (driver) side and 670158066 is for the right (passenger) side.
- When buying a used bracket, the most important check is for cracks and intact mounting points. Any damage makes the part unusable.
- A used OEM bracket from an undamaged vehicle offers the same quality and fit as a new part for a fraction of the price, making it the best value for repairs.
Symptoms of a Damaged Fender Support Bracket
As a fixed, structural part, the fender support bracket does not fail from wear and tear. Damage is almost always the result of a collision or impact. The symptoms are physical and visual, not electronic.
- Fender Misalignment: The most obvious sign is an uneven or wide gap between the fender and the hood, door, or bumper cover. The fender may appear to sag or stick out.
- Rattling or Vibrating Noises: A loose, cracked, or broken bracket can cause the fender to vibrate against the chassis, creating rattling or buzzing sounds, especially on rough roads.
- Visible Damage: After a minor impact, you may see that the bracket itself is cracked, bent, or broken. This often requires removing the fender liner for a clear view. 🎬 Watch: Maserati fender removal demonstration
- Difficulty with Fender Alignment: During collision repair, a body shop may find it impossible to properly align the fender. This often points to a bent or damaged underlying support bracket that needs replacement.
Known Issues, TSBs, and Recalls
As of mid-2026, there are no known common failure patterns, Technical Service Bulletins (TSBs), or recalls issued by Maserati or the NHTSA specifically for the fender support mount brackets on the 2023-2024 Grecale. This part is simple and robust, with failures being tied to individual vehicle accident history rather than a manufacturing defect.
The Grecale has had recalls for other issues, such as software for the rearview camera and issues with headlight adjustment caps, but none are related to the vehicle's body structure or fender mounts.
Pro Tip: Any issue with this bracket is almost certainly from collision damage. If you are inspecting a used Grecale for purchase, check the fender alignment and look for signs of repair in this area as an indicator of a past accident.
Buying a Used Fender Support Bracket
For a structural part like this, a used OEM bracket from an undamaged vehicle is an excellent value. It offers the exact same fitment and quality as a new part from a dealer, but at a significantly lower cost. Aftermarket versions are not common for this specific component and may have fitment issues, which is unacceptable for a vehicle with tight panel gap tolerances like the Grecale.
Physical Inspection Checklist
When buying a used bracket, a careful physical inspection is critical. Since you are likely buying it for a collision repair, ensure the replacement part is perfect.
- Check for Cracks: Meticulously inspect the entire bracket, especially around the mounting holes and corners, for any hairline cracks or stress marks (white-ish lines on the plastic).
- Verify All Mounting Points: Ensure all mounting holes are intact, round, and not broken or stripped. A bracket with a broken tab is unusable.
- Look for Bends or Warping: Lay the bracket on a flat surface to ensure it is not bent or warped. Any deformation means it came from a wrecked vehicle and will not allow for proper fender alignment.
- Confirm Part Number and Side: These brackets are side-specific. Verify the part number to ensure you are buying for the correct side of the vehicle.
Cost Comparison
| Part Type | Estimated Price Range | Notes |
|---|---|---|
| New OEM | $40 - $65 | Purchased from a Maserati dealership parts department. |
| Used OEM | $20 - $40 | Offers the best value, providing factory fitment at a lower cost. |
| New Aftermarket | Not Available | Aftermarket options for this specific bracket are not currently available. |
| Shop Labor | $150 - $300 | Typically involves 1.0-2.0 hours of labor for fender liner removal, bracket replacement, and reassembly. |
Replacement Information
Replacing the fender support bracket is a moderately difficult job that a skilled DIYer can perform. The main challenge is carefully working around the painted fender to avoid scratches.
- Difficulty: 3 out of 5
- Estimated Time: 1.5 hours
- Tools Required: Socket set, trim removal tools, torque wrench, jack and jack stands.
The general process involves jacking up the vehicle, removing the front wheel, detaching the plastic fender liner to gain access, unbolting the damaged bracket, and installing the new one. The key is to ensure the new bracket is seated correctly before tightening the bolts to achieve proper fender alignment.
🎬 See: How to align a replacement fenderTechnical Specifications and Part Numbers
Part number verification is essential. The brackets for the left and right sides are different and not interchangeable.
| Part Number | Side | Notes |
|---|---|---|
| 670160091 | Left / Driver Side | This is the primary support bracket for the front left fender. |
| 670158066 | Right / Passenger Side | This is the primary support bracket for the front right fender. |
Frequently Asked Questions (FAQ)
Can a broken fender support bracket be repaired?
No. Due to its structural nature and material (often a specific plastic composite), repairing a cracked or broken bracket is not recommended. A repair will not restore the original strength, leading to poor fender fitment and potential vibration. Replacement is the only correct solution.
Do I need to paint a new fender support bracket?
No. This is a structural part located behind the fender and under the hood. It is not a cosmetic piece and comes as unpainted black plastic or coated metal from the factory.
Is this bracket the same for all Grecale trims (GT, Modena, Trofeo)?
Yes, based on available parts catalogs, the primary fender support brackets (670160091 and 670158066) are the same across all 2023-2024 Grecale trims, including the GT, Modena, and Trofeo.
What other parts might I need to replace along with the bracket?
Since bracket damage is caused by impact, you should also inspect the fender liner, the fender itself, and the front bumper cover for damage. You may also need to replace various plastic clips and fasteners that can break during removal.
Helpful Videos
Technical Specifications
OEM Part Numbers: 670158066 670160091
Material: Typically high-strength plastic composite. Side-specific fitment.
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Maserati Grecale: