Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.
Wrenchy
Go-Parts Garage
Expert guides for diagnosing, troubleshooting, and replacing auto parts Expert guides for diagnosing and replacing auto parts
Browse All →
🛍️ Shop This Part

2022-2024 Lucid Air Overhead Console: Troubleshooting Lights and Part Number Guide

This guide covers common issues, part number verification, and replacement for the integrated overhead dome light and console in the 2022-2024 Lucid Air.

5 minutes to read 2022-2024 Lucid Air
Difficulty
1/5
Est. Time
0.5 hrs
DIY Doable?
✅ Yes
Shop Labor
$60 - $120
Used OEM Price
$50 - $75
⚠️ Drivable, but... — Yes, but if the integrated hazard light button is non-functional, the vehicle is unsafe for roadside emergencies and should be repaired immediately.
Key Takeaways
  • The most critical step before buying a replacement is to verify the OEM part number is P11-NBA1AS-04 to ensure compatibility.
  • Many apparent 'failures' of the console may be software glitches common to the Lucid Air platform; try a system reboot before replacing the part.
  • This is a sealed LED unit, not a simple bulb. If the lights fail, the entire console assembly must be replaced.
  • A faulty hazard button is a critical safety failure; if this button stops working, replace the console immediately.
The dome light assembly in the 2022-2024 Lucid Air is more than just a light; it's an integrated overhead console. This component houses the primary front interior map and dome lights, which are touch-activated LED units. It also contains the physical button for the vehicle's hazard lights, a critical safety feature. Depending on the vehicle's trim and options, this console may also integrate microphones for the voice command system and sensors for the alarm or climate control. It functions as a central hub for overhead controls and lighting, communicating with the vehicle's body control module.

Symptoms of a Failing Overhead Console

Failures in the Lucid Air's overhead console can range from simple annoyances to more significant functional problems. Given the vehicle's complex electronics, it's important to distinguish between a hardware failure and a software glitch.

1. Lights Do Not Turn On or Off

The most common symptom is when the touch-activated map lights or the main dome light fail to respond. The lights may be stuck permanently on, which could potentially drain the 12-volt battery over time, or they may not turn on at all, either by touch or when a door is opened.

2. Flickering or Intermittent Operation

LED lights that flicker or work intermittently often point to a poor electrical connection or a failing component within the sealed LED unit. This could be a problem with the console's internal circuit board or the connector where it plugs into the vehicle's wiring harness.

3. Unresponsive Hazard Light Button

A critical failure is when the physical hazard light button on the console stops working. This is a major safety concern, as it prevents you from warning other drivers of a roadside emergency. If the hazard button is unresponsive, the console should be inspected and replaced immediately.

4. Ambient Lighting or Software-Related Glitches

Some owners have reported issues with the vehicle's ambient lighting themes not changing color correctly. While the overhead console is part of the interior lighting system, these issues are often tied to the vehicle's main software and may be resolved with a system reboot rather than by replacing the console itself. Similarly, temporary unresponsiveness of the console could be part of a wider software bug affecting the car's screens and modules.

Pro Tip: Before assuming the console has failed, try performing an infotainment system reboot. Many electronic glitches in the Lucid Air can be resolved this way. Press and hold the two inner-most buttons on the steering wheel for about 10 seconds until the main displays restart. If the lighting issue persists after a reboot, it is more likely a hardware problem.

Known Issues, Recalls, and Service Bulletins

As of mid-2026, there are no specific recalls or Technical Service Bulletins (TSBs) from Lucid or the NHTSA that directly address the overhead dome light console for the 2022-2024 Lucid Air. However, the Lucid Air platform has experienced numerous software-related issues and recalls for other electronic systems. It is plausible that some lighting issues could be side effects of broader software bugs that are often addressed through over-the-air (OTA) updates.

Buying a Used Dome Light for Your Lucid Air

Since aftermarket options are not available for this specialized component, a used OEM console is the most practical and cost-effective solution for a hardware failure. Here’s what to look for.

Part Number Verification: The Crucial First Step

Warning: The primary known part number for this overhead console is P11-NBA1AS-04. Search results may show another part number, P11-NBC1AS-00, for a similar front overhead component. These parts may differ based on trim level (Pure, Touring, Grand Touring) or optional packages like the 'Comfort & Convenience Package' which adds features. Always verify that the part number P11-NBA1AS-04 matches your vehicle's original part before purchasing to ensure full compatibility.

Physical Inspection Checklist

When buying a used console, inspect it carefully:

  • Lenses and Housing: Check for any cracks, deep scratches, or signs of heat damage on the plastic lenses and main body.
  • Mounting Tabs: Ensure all plastic mounting clips and tabs are intact. These are essential for a secure, rattle-free installation.
  • Hazard Button: Press the hazard button. It should have a clean, tactile click and not feel sticky or broken.
  • Electrical Connector: Look at the connector pins on the back of the unit. They should be straight, clean, and free of any corrosion or damage.

Why Choose a Used OEM Part?

For a vehicle as electronically complex as the Lucid Air, using a genuine OEM part is critical. An OEM console guarantees perfect physical fitment, correct electronic communication with the car's other modules, and matching interior color and finish. Aftermarket parts, if they were available, would risk incompatibility, leading to functional errors or even fault codes.

Cost Comparison

Repair costs can vary significantly between new and used parts. Labor costs are generally low due to the simple installation.

Part Type Estimated Cost
New OEM $250 - $400 (Estimate, dealer-only part)
Used OEM $50 - $75
New Aftermarket Not Available
Shop Labor $60 - $120

Replacement Overview

Replacing the overhead console is a straightforward task suitable for most DIYers.

  • Difficulty: 1/5 (Very Easy)
  • Estimated Time: 15-30 minutes
  • Tools Needed: Plastic trim removal tool

The general process involves carefully prying the console down from the headliner using a plastic trim tool to avoid damage. Once it's loose, you can access the single electrical connector on the back. Disconnect the harness, connect the new unit, and carefully press the console back into place until the clips engage.

Frequently Asked Questions (FAQ)

Is the dome light just a bulb I can replace?

No, the lighting elements in the 2022-2024 Lucid Air overhead console are integrated LEDs. They are part of the console's circuit board and cannot be replaced individually like traditional bulbs. If the lights fail, the entire console assembly must be replaced.

Can a bad dome light drain my Lucid Air's 12V battery?

Yes. If the console malfunctions and causes the interior lights to stay on indefinitely, it can slowly drain the vehicle's 12-volt accessory battery. While the car's main high-voltage battery will typically recharge the 12V battery, a persistent parasitic drain can still cause issues over time.

What is the difference between part numbers P11-NBA1AS-04 and P11-NBC1AS-00?

While specific details are scarce, different part numbers for the same location in a vehicle usually indicate variations in features, color, or trim level. For example, one part may be for a car with a standard roof while another is for one with the Glass Canopy, or for different interior color schemes like Purluxe vs. Nappa leather. It is critical to match the part number from your original unit to ensure all features function correctly.

Does a replacement overhead console need to be programmed?

It is unlikely that this specific component requires programming. It is generally considered a plug-and-play part. As long as you install a compatible used OEM unit with the correct part number, it should function immediately upon connection.

Technical Specifications

Specification Value
Vehicle Fitment 2022-2024 Lucid Air
Verified OEM Part Number P11-NBA1AS-04
Location Front, Overhead, mounted in headliner
Lighting Type Integrated LED

Technical Specifications

OEM Part Numbers: P11-NBA1AS-04

Integrated LED lighting, touch activation, includes hazard warning switch.

Wrenchy
Article researched & written by
Go-Parts' AI research assistant. Every article is backed by live web research, verified OEM data, and real technician knowledge — so you get accurate, up-to-date information you can trust.
Meet Wrenchy → Updated Jul 21, 2026

The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.

Year Coverage
This article covers the Dome Light for:
  • Lucid Air: 202220232024
In this article
🛍️ Shop This Part
Jump to ▴

Email This Guide

We'll send you a link to this article so you can read it later or share it.

Added to cart · Part