2022-2025 Genesis GV70 Dashboard End Cap: Rattle Fix & Replacement Guide
How to replace a broken, scuffed, or rattling dash end cap on your GV70, and what to inspect before buying a used one.
- The most critical factor when buying a used end cap is to inspect the back and ensure all mounting clips are intact; a single broken clip will cause rattles.
- This part is color-matched to the interior. You must verify the color code or match it visually, as many variations exist for the GV70.
- Replacement is a simple, 5-minute DIY job requiring only a plastic trim tool, making it easy to avoid shop labor costs.
- There are no specific recalls or TSBs for this part, but it can be a source of the interior rattles some GV70 owners have experienced.
Symptoms of a Failing Dashboard End Cap
Since the dashboard end cap is a simple, non-electronic trim piece, failure is related to its physical condition and fit. While some Genesis GV70 owners have reported various interior rattles, a loose or broken end cap can be a specific source of these noises. Symptoms are straightforward:
- Rattling or Buzzing Noises: The most common symptom is a persistent rattle or buzz coming from the side of the dashboard, especially when driving on rough roads. This is almost always caused by one or more broken mounting clips on the back of the panel, preventing it from sitting securely.
- Visible Cosmetic Damage: Scratches, deep gouges, or scuffs are common, often caused by contact with keys, bags, or seatbelts. While this doesn't affect function, it detracts from the interior's appearance.
- Loose Fit or Falling Off: You may notice the cap is not flush with the dashboard or door frame. In severe cases where most clips are broken, the panel may fall off completely when the door is opened.
Known Issues, TSBs, and Recalls
As of mid-2026, there are no specific recalls or Technical Service Bulletins (TSBs) from Genesis for the dashboard end caps on the 2022-2025 GV70. However, Genesis has issued a service campaign (T29G) for a creaking noise from the front inside door handle on some 2023 models, indicating that interior fit-and-finish noises are on the manufacturer's radar. A loose end cap can be a similar source of annoyance, but is typically a much simpler fix.
Pro Tip: Before assuming a rattle is from a major component, firmly press on the dashboard end cap with the door open. If the noise stops or changes, you've likely found the culprit.
Buying a Used 2022-2025 GV70 Dashboard End Cap
A used OEM end cap is an excellent value, but a careful inspection is essential to ensure you get a good part. Cheap aftermarket copies for this specific part are generally not available.
1. Inspect the Mounting Clips (Most Important)
This is the most critical check. Turn the panel over and inspect every mounting clip and tab. They should all be present, without any cracks or stress marks. Even one broken clip can cause the panel to rattle or sit improperly. Do not purchase a part with broken clips, as repairing them is not a reliable solution.
2. Verify the Interior Color
The Genesis GV70 was offered with numerous interior color schemes. The end caps are color-matched to the dashboard. You must get the correct color for your vehicle. Part numbers often include a three-letter suffix that indicates the color. For example:
- -LEG: Burgundy
- -OCW: Brown
- -UBL: Blue
- -NNB: Black
Always confirm the color with the seller, preferably by comparing it to photos of your own vehicle's interior in good lighting.
3. Check for Cosmetic Condition
Examine the face of the panel for deep scratches, scuffs, or discoloration. Minor surface marks may be acceptable, but deep gouges will be permanent. Ensure the texture and finish match your vehicle's original part.
Installation Guide
Replacing the dashboard end cap is a very simple DIY task that requires no special expertise.
- Difficulty: 1/5
- Estimated Time: 5 minutes
- Tools Required: Plastic trim removal tool (a flathead screwdriver wrapped in tape can work, but may scratch surrounding panels).
Step-by-Step Replacement
- Open the Door: Fully open the driver's or passenger's side door to get clear access to the end cap.
- Pry Off the Old Cap: Insert a plastic trim removal tool into the seam between the end cap and the main dashboard. Gently pry outwards. The cap is held in by clips, so you will hear them pop as they release. Work your way around the panel until it comes free.
- Align the New Cap: Take the replacement end cap and align its clips with the corresponding holes in the dashboard structure.
- Press to Secure: Press firmly and evenly around the face of the cap. You will hear and feel the clips snap into place. Ensure all edges are flush with the surrounding dashboard and A-pillar trim.
Cost Comparison for a GV70 Dashboard End Cap
| Part Type | Estimated Cost | Notes |
|---|---|---|
| New OEM | $30 - $45 | Purchased from a Genesis dealership or online OEM parts retailer. Guarantees perfect color and fit. |
| Used OEM | $20 - $35 | Sourced from a recycled vehicle. Offers the best value, but requires careful inspection of clips and color. |
| New Aftermarket | Not Available | Specific aftermarket replacements for this trim piece are not commonly manufactured. |
| Shop Labor | $50 - $90 | A repair shop would likely charge their minimum fee, typically 0.5 hours of labor, for this simple task. |
OEM Part Numbers
The base part numbers are specific to the driver's (Left) and passenger's (Right) side. The suffix changes based on the interior color. Always verify the full part number with a dealer or seller if you are unsure.
| Position | Base Part Number | Common Suffix Examples |
|---|---|---|
| Left (Driver Side) | 84780-AR000 | 84780-AR000-LEG (Burgundy), 84780-AR000-OCW (Brown) |
| Right (Passenger Side) | 84785-AR000 | 84785-AR000-UBL (Blue) |
Frequently Asked Questions (FAQ)
What is the difference between the left and right dashboard end caps?
They are mirror images of each other and are not interchangeable. The part number for the left (driver's) side is 84780-AR000, and the right (passenger's) side is 84785-AR000.
My end cap is rattling. Does it need to be replaced?
Not always, but it's likely. First, try pressing firmly on it to see if it simply wasn't seated correctly. If that doesn't work, the rattle is almost certainly caused by a broken mounting clip, which requires replacing the entire panel.
Can I repair a broken mounting clip?
It is not recommended. Attempting to glue a broken plastic clip is rarely a durable or effective solution. The vibration and temperature changes inside a car will likely cause the repair to fail quickly, leading to the same rattle. Replacement is the only reliable fix.
Do I need a special tool to replace the dashboard end cap?
A plastic trim removal tool is highly recommended. Using a metal screwdriver or other hard object can easily scratch or gouge the soft-touch dashboard material or the end cap itself. A set of plastic trim tools is inexpensive and useful for any interior work.
Technical Specifications
OEM Part Numbers: 84780-AR000 84785-AR000 84780-AR000-LEG 84780-AR000-OCW 84785-AR000-UBL 84780-AR000-NNB 84785-AR000-NNB
Material: Molded Plastic. Attachment Method: Snap-in plastic clips.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Genesis GV70:
- 🛍️ Shop This Part
- Symptoms of a Failing Dashboard End Cap
- Known Issues, TSBs, and Recalls
- Buying a Used 2022-2025 GV70 Dashboard End Cap
- 1. Inspect the Mounting Clips (Most Important)
- 2. Verify the Interior Color
- 3. Check for Cosmetic Condition
- Installation Guide
- Step-by-Step Replacement
- Cost Comparison for a GV70 Dashboard End Cap
- OEM Part Numbers
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off