2019-2021 Genesis G70 Console Panel: Auto vs. Manual & Common Wear Points
This guide covers the critical differences between automatic and manual console panels for the 2019-2021 Genesis G70, and how to inspect a used one for common wear and damage.
- The most critical factor is matching the part to your vehicle's transmission (Automatic vs. Manual), as they are not interchangeable.
- When buying a used panel, always inspect the back for broken or stressed mounting tabs, which will cause poor fit and rattles.
- Verify the interior color and finish (e.g., black, cream, gray) before purchasing, as multiple options were available.
- Replacement is a manageable DIY job that requires a plastic trim removal tool to prevent damage to the surrounding interior.
Critical Compatibility Warning: Automatic vs. Manual Transmission
Important: Genesis produced two completely different center console designs for the 2019-2021 G70 based on the transmission. The console panels for automatic transmission vehicles are NOT interchangeable with those for manual transmission vehicles. The shape, size, and mounting points are different. Before ordering, you must verify which transmission your vehicle has and purchase the corresponding panels.
The most significant difference is in the main console piece that these side panels attach to. The automatic version has a specific layout for the electronic shifter and surrounding buttons, while the manual version has a large, traditional boot opening. This fundamental design change affects the shape of the adjoining side panels.
Common Issues and Failure Points
As a high-contact area, the console trim panels are susceptible to cosmetic wear and tear. Unlike mechanical parts, failure is almost always visible.
- Scratches and Scuffs: The most common issue is surface damage from keys, phones, bags, and general contact. The piano black and silver-painted trim areas are particularly prone to scratching.
- Peeling or Worn Finish: Some owners have reported the finish on the silver or painted trim areas peeling or bubbling over time. This can sometimes be caused by harsh cleaning chemicals.
- Broken Mounting Tabs: The panels are secured by plastic clips and tabs. These can become brittle and break during removal for other repairs, leading to a panel that fits poorly, rattles, or has noticeable gaps.
- Stains and Discoloration: Spills from drinks can get into seams and stain the padded leatherette material or damage the finish on the plastic trim.
Buying a Used 2019-2021 G70 Console Trim Panel
A used OEM panel in good condition can be an excellent value, offering a perfect factory match for fit and finish. However, careful inspection is crucial.
- Confirm Transmission Type: This is the most important step. Ensure the part you are buying is explicitly listed for an Automatic or Manual transmission to match your vehicle. Check the part number if possible.
- Inspect All Mounting Points: Turn the panel over and carefully inspect every plastic tab and clip location. Look for stress marks (white discoloration in the plastic) or completely broken tabs. A panel with even one broken main tab may not install securely.
- Check the Finish and Color: The G70 was available with several interior color schemes, such as all black, black with gray, and cream. The 'Black Padded Leather' finish may not be universal across all trim levels. Compare the photos of the used part to your vehicle's interior in good lighting to ensure an exact match.
- Examine for Surface Damage: Look closely at all photos for deep scratches, gouges, or peeling finish. Minor scuffs may be acceptable, but deep damage is often impossible to repair satisfactorily.
Pro Tip: When buying online, ask the seller for a clear photo of the back of the panel to verify the condition of all mounting tabs before you commit to purchasing.
Part Numbers and Compatibility
Part numbers are the best way to ensure you get the correct panel. The last three letters (e.g., NNB) are the color code.
| Transmission | Position | Part Number (Black - NNB) |
|---|---|---|
| Automatic | Left (Driver Side) | 84610-G9000-NNB |
| Automatic | Right (Passenger Side) | 84611-G9000-NNB |
| Manual | Left (Driver Side) | 84610-G9100 |
| Manual | Right (Passenger Side) | 84611-G9100 |
Replacement Overview
Replacing the console side panels is a relatively straightforward task suitable for a DIYer with patience.
- Difficulty: 2 out of 5
- Tools Needed: Plastic trim removal tool kit, Phillips head screwdriver.
- Time: 0.5 - 1.0 hours.
The general process involves removing the main upper console trim piece first. Start by opening the armrest and using a plastic pry tool to gently lift the rear of the main console trim. Work your way forward, releasing the clips. Before you can fully remove the top piece, you will need to disconnect several electrical connectors for the shifter, drive mode knob, and heated/cooled seat controls. Once the top console assembly is removed, the side panels are typically exposed and can be unclipped or unscrewed.
Warning: Always use plastic pry tools to avoid scratching or damaging the console and surrounding interior trim pieces.
Recalls and Technical Service Bulletins (TSBs)
As of mid-2024, there are no specific recalls or TSBs from the NHTSA for the center console side trim panels on the 2019-2021 Genesis G70. There is a TSB (25-BD-001G) related to stained or discolored exterior dark chrome trim, but this does not apply to interior components. Some owners have had peeling interior trim replaced under warranty on a case-by-case basis.
Cost of Replacement
| Item | Cost Estimate |
|---|---|
| New OEM Panel (per side) | $90 - $190 |
| Used OEM Panel (per side) | $50 - $85 |
| New Aftermarket | Not Generally Available |
| Shop Labor | $75 - $150 |
Frequently Asked Questions (FAQ)
Can I fix a scratched or peeling console panel?
For very light surface scratches on glossy "piano black" plastic, a plastic polish may help reduce their appearance. However, for deep scratches, peeling paint, or damaged leatherette, replacement is the only effective solution.
Will a console panel from a 2022 G70 fit my 2020 G70?
No. The Genesis G70 received a significant interior refresh for the 2022 model year, which included a redesigned center console. Parts from 2022 and newer models are not compatible with the 2019-2021 generation.
How do I clean my G70's console panels without damaging them?
Use a soft microfiber cloth with a pH-neutral interior cleaner or a simple solution of mild soap and water. Avoid using harsh, ammonia-based, or solvent-based cleaners, as they can break down the plastic and leatherette finishes over time, leading to peeling or discoloration.
Why is my new panel rattling after installation?
A rattling noise almost always indicates that a mounting clip is not fully seated or is broken. It could also mean an electrical connector underneath was not secured back in its holder. You may need to remove the panel again to inspect the clips and ensure everything is securely fastened.
Technical Specifications
OEM Part Numbers: 84611-G9000-NNB 84610-G9000-NNB 84611-G9100 84610-G9100 84611-G9000-VNB
Material: Plastic with padded leatherette or painted finish. Fitment is specific to 2019-2021 Genesis G70 models.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Genesis G70:
- 🛍️ Shop This Part
- Critical Compatibility Warning: Automatic vs. Manual Transmission
- Common Issues and Failure Points
- Buying a Used 2019-2021 G70 Console Trim Panel
- Part Numbers and Compatibility
- Replacement Overview
- Recalls and Technical Service Bulletins (TSBs)
- Cost of Replacement
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off