2020-2022 Hyundai Palisade Console Tray: Fitment, Part Numbers, and Replacement
This guide covers the common issues, part numbers, and critical fitment differences for the first-generation Hyundai Palisade console tray.
- This console tray only fits 2020-2022 Hyundai Palisade models; it will NOT fit the refreshed 2023+ models.
- Failure is always physical (cracks, warping) and does not affect vehicle operation. There are no TSBs or recalls for this part.
- Replacement is extremely easy and requires no tools—simply lift the old one out and drop the new one in.
- Used OEM trays are a reliable, cost-effective option, but inspect for cracks and warping before buying.
Vehicle Fitment and Compatibility Warning
Crucial Fitment Note: This console tray is specifically for the 2020, 2021, and 2022 Hyundai Palisade models. These model years represent the first generation before the mid-cycle refresh. In 2023, Hyundai updated the Palisade's interior, which included a slight redesign of the center console's dimensions. As a result, a tray from a 2020-2022 model will not fit properly in a 2023 or newer Palisade, and vice-versa. Always verify your vehicle's model year before purchasing.
Symptoms of a Failing Console Tray
Since the console tray is a simple piece of molded plastic, failure is always physical rather than mechanical. Symptoms are straightforward and visual:
- Cracks or Fractures: The most common issue is physical damage from dropping the tray or placing heavy, sharp objects on it. Look for stress marks or cracks, especially around the corners.
- Warping: Prolonged exposure to high heat and direct sunlight can cause the plastic to warp. A warped tray will not sit flat in the console, leading to rattling or an improper fit.
- Rattling Noises: A rattling sound from the center console can sometimes be attributed to a warped or damaged tray that no longer fits snugly. It may also be caused by aftermarket trays that don't have precise OEM dimensions.
- Broken Tabs or Dividers: The small dividers that create compartments within the tray can break, reducing its organizational effectiveness.
Buying a Used 2020-2022 Console Tray
Purchasing a used OEM console tray is a cost-effective way to replace a broken or missing one. Because it's a simple part, there is very little risk as long as you perform a careful inspection.
What to Inspect Before You Buy
- Check for Cracks: Carefully inspect the entire tray, paying close attention to the corners and the thin edges where it rests on the console lip. These are the most common points of failure.
- Verify Flatness: Place the tray on a flat surface to check for any warping. If it rocks or doesn't sit flush, it will likely rattle in your vehicle.
- Confirm the Part Number: If possible, check for the OEM part number. The correct number for the standard drop-in tray is often 84630-S8350. This ensures you are getting a genuine part with the correct fit.
- Assess Overall Condition: Look for deep scratches, chemical stains, or significant discoloration that might not be easily cleaned.
Pro Tip: For a simple plastic part like this, a used OEM tray is often a better choice than a new, cheap aftermarket one. The original Hyundai part is guaranteed to fit perfectly, whereas some aftermarket organizers may have slight fitment issues that cause rattling or difficulty closing the console lid.
Known Issues, TSBs, and Recalls
There are no recalls or Technical Service Bulletins (TSBs) issued by Hyundai specifically for the plastic console tray. It is a non-safety-critical, simple component.
However, owners have sometimes mistaken other vehicle noises for a faulty console tray. One notable TSB for the 2020-2021 Palisade addresses a knocking or rattling noise from the rear shock absorbers (TSB #22-SS-001H). If you hear a rattle, be sure to isolate its location before assuming it's the console tray.
Replacement Difficulty and Procedure
- Difficulty: 1 out of 5 (Extremely Easy)
- Estimated Time: Less than 1 minute
- Tools Required: None
Replacement is a simple drop-in process. To remove the old tray, simply lift it straight out of the center console. To install the new one, align it with the opening and set it down into place. It should rest securely on the integrated ledges inside the console compartment.
Cost Comparison
Pricing for a replacement console tray varies significantly between OEM, used, and aftermarket options.
| Part Type | Estimated Cost | Notes |
|---|---|---|
| New OEM | $50 - $100 | Purchased from a Hyundai dealership. Guarantees perfect fit and finish. |
| Used OEM | $25 - $50 | A cost-effective option that retains OEM quality and fit. Check sources like eBay. |
| New Aftermarket | $15 - $45 | Widely available online. Quality and fit can vary, with some owners reporting minor issues. |
| Shop Labor | $0 | This is a simple drop-in part that requires no labor cost to install. |
Technical Specifications & Part Numbers
The key is to ensure you are buying the part for the correct 2020-2022 model years.
- Verified OEM Part Number (Upper Tray): 84630-S8350
- Material: Black ABS Plastic
- Initial Vetted Part Numbers: The numbers 85750-S8700, 85750-S8700-NNB, 85750-S8700-RBD, and 85750-S8700-WDN appear to correspond to larger, more complex console assemblies or trim pieces, not the simple removable tray. The suffixes (NNB, RBD, WDN) typically denote interior color codes.
Frequently Asked Questions (FAQ)
Will a console tray from a 2023 Palisade fit my 2021 model?
No, it will not. The center console was redesigned for the 2023 model year, and the dimensions are different. You must use a tray specifically designed for 2020-2022 models.
Is an aftermarket organizer a good alternative?
Yes, for many owners it is a good, low-cost alternative. Aftermarket trays are widely available and often provide different compartment layouts. However, be aware that fitment may not be as precise as the OEM part, which can sometimes lead to minor rattling or a tight-fitting console lid.
How do I clean the console tray?
The tray can be easily removed and cleaned with mild soap and water or an all-purpose interior automotive cleaner. Many aftermarket trays come with removable rubber liners that can be taken out and washed separately.
My console tray is missing. Will the console still work?
Yes. The tray is purely for organization. Its absence does not affect the function of the center console, its lid, or any of its electronic features like the wireless charger.
Technical Specifications
OEM Part Numbers: 84630-S8350
Material: Molded ABS Plastic; Fitment: 2020-2022 Hyundai Palisade only.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Hyundai Palisade:
- 🛍️ Shop This Part
- Vehicle Fitment and Compatibility Warning
- Symptoms of a Failing Console Tray
- Buying a Used 2020-2022 Console Tray
- What to Inspect Before You Buy
- Known Issues, TSBs, and Recalls
- Replacement Difficulty and Procedure
- Cost Comparison
- Technical Specifications & Part Numbers
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off