2016-2019 Range Rover Evoque Console Lid: A Guide to Worn Surfaces and Latch Issues
This guide covers the common failure points of the 2016-2019 Range Rover Evoque center console lid, including how to inspect a used part and the straightforward replacement process.
- The most common failures are a broken latch mechanism and cosmetic wear (peeling/cracking) on the surface.
- No recalls or TSBs are active for this specific part; failures are due to normal wear.
- Replacement is a simple DIY task requiring only a Torx driver, taking less than an hour.
- Buying a used OEM lid is the best value, as new OEM lids are often only sold as part of a very expensive full console assembly.
Symptoms of a Failing Console Lid
Failures of the Evoque's console lid are typically mechanical or cosmetic, resulting from normal wear and tear. Because it is not a complex electronic part, diagnosis is straightforward and based on physical inspection.
- Lid Won't Latch or Stay Closed: The most common issue is a worn or broken latch mechanism. You may find the lid pops open on its own, especially when driving over bumps, or that it won't click securely into place when you try to close it.
- Peeling or Cracked Surface: The leather or vinyl covering on the armrest can begin to peel, bubble, or crack over time. This is often caused by sun exposure, heat, and repeated contact with skin oils and cleaning products.
- Broken or Loose Hinge: The hinge assembly that connects the lid to the console base can crack or break. This will cause the lid to feel excessively wobbly, sit crooked, or detach completely from the console.
- Difficulty Opening: The release button or latch handle may become stiff or fail to disengage the lock, requiring excessive force to open the storage compartment.
- Rattling Noises: A loose hinge or a failed latch can cause the lid to vibrate and rattle against the console base, creating an annoying noise while driving.
Known Issues, TSBs, and Recalls
As of this writing, there are no specific Technical Service Bulletins (TSBs) or safety recalls issued by Land Rover or the NHTSA for the front center console lid on the 2016-2019 Range Rover Evoque. While Land Rover has issued recalls for armrest latches on other models, such as the second-row armrest on newer Range Rovers, this specific part has not been subject to a recall. Any issues you encounter are typically due to age and wear rather than a manufacturing defect.
Pro Tip: The console lid is often part of a larger assembly in dealer parts diagrams. Part numbers like LR071508 refer to the entire center console base, not just the lid. When searching for a replacement, use descriptive terms like "2017 Evoque armrest lid" and visually match the part.
Buying a Used 2016-2019 Evoque Console Lid
Purchasing a used OEM console lid is the most cost-effective way to restore your interior. Aftermarket options are generally limited to decorative stick-on covers, not complete replacement lids. Here’s what to inspect before you buy:
- Inspect the Latch Mechanism: This is the most critical checkpoint. Ask the seller for clear photos of the latch hook and the corresponding catch on the lid. If possible, request a short video showing the lid clicking shut and staying closed. A worn latch is the number one reason for replacement.
- Examine the Surface Condition: Carefully check photos for any signs of peeling, bubbling, or deep scratches in the leather or vinyl. Pay close attention to the front edge and driver's side, which experience the most wear. Sun damage can make the material brittle and discolored.
- Check the Hinge Integrity: Look at the mounting points on the back of the lid. Ensure there are no stress cracks in the plastic. The hinge should be intact and free of damage.
- Verify Color and Material: The Evoque was offered with several interior color schemes, most commonly Ebony (black) and Almond (beige). Confirm the color of the used part matches your vehicle's interior trim. Also, ensure the material (e.g., leather, vinyl with specific stitching) matches your trim level.
Replacement Guide
Replacing the console lid is a simple DIY task that can be completed in under an hour with basic tools. The general process involves removing the armrest lid assembly from the console base.
Difficulty: 2/5 (Easy to Moderate)
Tools Required: Torx T20 driver, plastic trim removal tool (optional but recommended).
- Access the Mounting Screws: The armrest lid is typically secured by several Torx screws located on the sides of the hinge mechanism, inside the console.
- Loosen Side Trim (If Necessary): On some models, you may need to gently pry the side panels of the center console away to get clear access to all the screws. A YouTube tutorial for the L538 Evoque shows that removing a screw holding the side trim panel allows it to be pushed aside to expose the lid's mounting screws.
- Unscrew the Old Lid: Using a Torx T20 driver, carefully remove the screws securing the hinge assembly to the console base. There are typically three on each side. Be careful not to drop them into the console.
- Remove the Lid: Once all screws are removed, the entire lid and hinge assembly should lift off.
- Install the New Lid: Position the replacement lid and align the hinge mounting holes. Reinstall the Torx screws, making sure not to overtighten them.
- Re-secure Trim: If you loosened any side trim panels, snap them back into place and replace any retaining screws.
Cost Comparison
Replacing a worn or broken console lid with a used OEM part offers significant savings over purchasing a new assembly from a dealer.
| Part Type | Estimated Cost |
|---|---|
| New OEM Assembly (Entire Console) | $750 - $950+ |
| Used OEM Lid | $100 - $200 |
| New Aftermarket Lid | Not commonly available |
| Shop Labor | $100 - $200 |
Frequently Asked Questions (FAQ)
Can I just replace the broken latch instead of the whole lid?
Aftermarket replacement latches for this specific Evoque model are not widely available. The latch mechanism is typically integrated into the lid assembly, making replacement of the entire lid the most practical solution.
Will a console lid from a 2012-2015 Evoque fit my 2017 model?
Yes, the center console design remained largely the same for the entire first generation (L538), from 2012 to 2019. A lid from any of these years should fit, but always double-check the color and material to ensure it matches your interior.
How can I protect my new console lid from wearing out?
To prolong the life of the material, regularly clean it with a quality interior cleaner designed for leather or vinyl. Apply a UV-protectant conditioner every few months to prevent cracking and fading from sun exposure. Avoid using harsh chemicals or abrasive cleaners.
Is the replacement difficult? Can I do it myself?
The replacement is considered a beginner-friendly DIY job. It primarily involves removing a few Torx screws. The most challenging part may be carefully moving trim panels to access the screws, but the entire process typically takes less than an hour.
Technical Specifications
OEM Part Numbers: LR025668 (Related: Rear Console Side Panel) LR066240 (Related: Rear Console End Panel) LR071508 (Related: Full Center Console Assembly)
Material: Leather or Vinyl over plastic base. Common Colors: Ebony (Black), Almond (Beige), Pimento (Red).
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Land Rover Range Rover Evoque: