Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.
Wrenchy
Go-Parts Garage
Expert guides for diagnosing, troubleshooting, and replacing auto parts Expert guides for diagnosing and replacing auto parts
Browse All →
🛍️ Shop This Part

2014-2016 Maserati Ghibli Coin Holder: Latch Failures and Replacement Guide

This guide covers the common failure points, costs, and how to ensure you're buying the correct driver-side dashboard storage compartment for your Ghibli.

4 minutes to read 2014-2016 Maserati Ghibli
Difficulty
1/5
Est. Time
0.2 hrs
DIY Doable?
✅ Yes
Shop Labor
$50 - $125
Used OEM Price
$100 - $200
Safe to drive — A broken console coin holder is a cosmetic and convenience issue that does not affect the vehicle's safety or drivability.
Key Takeaways
  • This part is for the driver's side (LHD vehicles) and is NOT the main passenger glove box.
  • The most common failure is a broken latch, which prevents the door from staying closed.
  • When buying a used part, always test the latching mechanism to ensure it clicks shut securely.
  • Replacement is a very easy DIY job, requiring only a trim removal tool and about 15 minutes.
This part is a small storage compartment located on the dashboard to the left of the steering wheel in North American (LHD) vehicles. Often referred to as a coin holder or small glove box, its purpose is to provide the driver with quick access to small items like keys, coins, or sunglasses. It is a convenience feature integrated into the dashboard's design. The assembly consists of the storage box itself, a hinged door, and a push-button latching mechanism that allows it to open and close.

Buyer's Guide: 2014-2016 Maserati Ghibli Console Coin Holder

Crucial Compatibility Warning: This part is the LEFT side dashboard storage compartment. In North American (LHD) vehicles, this is the smaller compartment on the driver's side. It is NOT the main glove box, which is located on the passenger (right) side. Please verify this is the exact part you need before purchasing.

Common Symptoms of Failure

Failure of this part is typically mechanical and related to physical wear and tear. The most common issues are:

  • Door Will Not Stay Closed: The most frequent problem is a broken internal latching mechanism. You'll press the door shut, but it won't 'click' and will immediately pop back open.
  • Door Will Not Open: The push-button release may fail, preventing the door from opening when pressed. This can be due to a broken spring or a jammed latch.
  • Rattling Noises: A worn or loose hinge or a faulty latch can cause the door to rattle, especially when driving over bumps. Some owners also report rattles from the trim itself.
  • Cosmetic Damage: The soft-touch material on the door can peel or scratch over time, and the interior felt lining can become worn or damaged.

Buying a Used Console Coin Holder

Since this is an interior trim piece, buying a used OEM part is a great way to save money. However, you must inspect it carefully to avoid buying a part with the same problems you're trying to fix.

Step 1: Verify Part Numbers

Confirm the part number matches what you need. Known OEM part numbers are 670018704 and 6700187040. While other numbers may exist, starting with these is your best bet.

Step 2: Inspect the Latching Mechanism

This is the most critical check. Press the release button firmly. The door should open smoothly and without hesitation. Close the door and ensure it clicks shut securely. Gently pull on the closed door to make sure the latch holds it in place. If it pops open with a light pull, the latch is worn and should be rejected.

Step 3: Check the Hinge Integrity

Open and close the door several times. Check the hinge area for any signs of stress cracks in the plastic. The movement should be smooth, not loose or overly stiff.

Step 4: Examine Cosmetic Condition

Look for deep scratches, gouges, or peeling on the exterior of the door. Check the condition of the felt or flocked lining inside the compartment. Ensure there are no significant stains or damage that would be visible once installed.

Replacement Cost Comparison

Prices can vary based on supplier and condition. Here is a general cost expectation:

Part TypeEstimated Cost
New OEM$250 - $400+
New AftermarketNot Commonly Available
Used OEM$100 - $200
Shop Labor$50 - $125

Installation Guide (Difficulty: 1/5)

Replacing this component is a straightforward DIY task that should take less than 15 minutes.

  1. Gather Tools: You will need a plastic trim removal tool or a flathead screwdriver wrapped in tape to prevent scratching the dashboard.
  2. Open the Door: If possible, open the compartment door to get a better grip.
  3. Pry Out the Old Unit: Carefully insert the trim tool into the seam between the coin holder assembly and the dashboard. Gently pry outwards. The unit is held in by pressure clips and should pop out. Work your way around the component to release all the clips.
  4. Disconnect Electrical (If Applicable): Some versions may have a small light inside. If so, disconnect the single electrical connector by pressing the release tab.
  5. Install the New Unit: Connect the electrical connector if your vehicle has one. Align the new coin holder assembly with the opening in the dashboard and press it firmly into place until you hear the clips click and the unit sits flush.

Known Issues, Recalls, and Service Bulletins

There are no specific recalls or Technical Service Bulletins (TSBs) from Maserati that address the failure of the console coin holder itself. While the 2014-2016 Ghibli has been subject to several recalls for issues like seat wiring, fuel lines, and transmission software, none pertain to this specific interior trim piece. Some owners have noted general interior build quality concerns, such as cabin rattles, which could be related to trim pieces like this one.

Frequently Asked Questions (FAQ)

Is this the same as the main passenger glove box?

No. This is the smaller storage compartment located to the left of the steering column on the driver's side in LHD cars. The main glove box is on the passenger side.

Will this part fit a right-hand-drive (RHD) Ghibli?

No, this part is specifically for the driver's side of a left-hand-drive (LHD) vehicle, as found in North America and Europe. The dashboard configuration is different for RHD models.

My coin holder door rattles. How can I fix it without replacing it?

If the latch still works, you can try to fix a rattle by applying small pieces of felt tape or thin foam to the contact points where the door meets the housing. This can dampen vibrations and often solves minor rattling issues.

Can I just repair the broken latch?

Repairing the small plastic latch mechanism is very difficult and often not successful long-term. Some owners have attempted fixes with epoxy or custom-made clips, but the simplest and most reliable solution is to replace the entire assembly with a new or used unit.

Technical Specifications

OEM Part Numbers: 670018704 6700187040

Material: Plastic with soft-touch coating and felt-lined interior. Mounting: Held by pressure clips.

Wrenchy
Article researched & written by
Go-Parts' AI research assistant. Every article is backed by live web research, verified OEM data, and real technician knowledge — so you get accurate, up-to-date information you can trust.
Meet Wrenchy → Updated Jul 21, 2026

The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.

Year Coverage
This article covers the Console Coin Holder for:
  • Maserati Ghibli: 201420152016
In this article
🛍️ Shop This Part
Jump to ▴

Email This Guide

We'll send you a link to this article so you can read it later or share it.

Added to cart · Part