Aston Martin DB11 (2017-2023) Cargo Cover: A Guide to Fitment, Rattles, and Replacement
This guide covers common issues, inspection points for used parts, and the critical compatibility differences for the 2017-2023 Aston Martin DB11 cargo cover.
- This cargo cover fits 2017-2023 Aston Martin DB11 Coupe models ONLY and is not compatible with the Volante (Convertible).
- When buying a used unit, the most critical inspection is for cracks in the plastic end caps, as this is the most common failure point leading to rattles.
- Failure is typically related to wear (weak retraction spring) or cosmetic issues (sagging material); it is not a common problem part.
- Replacement is a simple DIY task that requires no tools and takes less than a minute.
Key Compatibility Warning: Coupe Models Only
Warning: This cargo cover is designed exclusively for the 2017-2023 Aston Martin DB11 Coupe. It will not fit the DB11 Volante (Convertible) model. The Volante has a complex power-folding soft top mechanism that occupies the area where the cargo cover would mount. The entire trunk and rear interior structure are different between the two body styles. Always confirm you are buying a cover for a Coupe.
🎬 Watch: Aston Martin DB11 exterior design and body styles guideSymptoms of a Failing Cargo Cover
While not a part known for frequent mechanical failure, the DB11 cargo cover can develop issues over time, primarily related to wear and tear. These symptoms are often cosmetic or result in annoying noises within the otherwise quiet cabin.
- Rattling or Squeaking Noises: This is the most common complaint. A rattling sound from the rear of the vehicle, especially over bumps, can indicate a loose-fitting cover. The noise may come from worn plastic end caps, a loose retraction mechanism, or simply the fit of the main bar in its mounting points. Aston Martin has issued service bulletins for other interior rattles, such as from the door panels, indicating that cabin noises are a known sensitivity for this model. 🎬 See: Inside the 2017 Aston Martin DB11 cabin
- Failure to Retract Smoothly: The internal spring mechanism that retracts the cover can weaken over time. This may cause the cover to retract slowly, get stuck part-way, or fail to retract at all.
- Sagging Cover Material: The fabric or vinyl material of the cover may begin to sag or detach from the roller bar. This is often due to age, sun exposure, or placing heavy objects on top of the cover.
- Broken Mounting Points: The plastic end caps, which contain the spring-loaded pins that hold the assembly in place, can become brittle and crack or break. This will prevent the cover from seating securely and is a major source of rattles.
Buying a Used 2017-2023 DB11 Cargo Cover: What to Check
Given the high cost of new Aston Martin parts, a used OEM cargo cover is a smart choice. Aftermarket versions are generally not available for this vehicle. Careful inspection is key to getting a good part.
- Verify Coupe Fitment: Before anything else, confirm the part is from a DB11 Coupe, not a Volante. The part number KY53-68870-AA has been identified on used units for sale.
- Inspect the End Caps: This is the most critical inspection point. Carefully examine the plastic end caps on both sides of the main housing. Look for hairline cracks, stress marks, or pieces that have broken off. A cover with damaged end caps will not fit securely and will rattle.
- Test the Retraction Mechanism: Pull the cover out to its full extension and allow it to retract. Do this several times. The action should be smooth, quick, and consistent. Any hesitation, grinding noises, or sluggishness indicates a worn internal spring.
- Examine the Cover Material: Unroll the cover completely and inspect the material under bright light. Look for stains, tears, sun fading, or areas where the material is separating from the pull bar or the main roller.
- Check the Pull Handle: Inspect the handle or grip on the end of the cover. Ensure it is not cracked, broken, or loose.
Pro Tip: If buying online, ask the seller for close-up photos of both end caps and a short video showing the cover retracting. This small step can save you from receiving a faulty part.
Cost of a DB11 Cargo Cover (2017-2023)
| Part Type | Estimated Cost |
|---|---|
| New OEM | $1,200 - $1,800+ (estimate) |
| New Aftermarket | Not Available |
| Used OEM | $350 - $600 |
| Shop Labor | $0 (DIY) |
Pricing is an estimate as of 2026 and can vary based on supplier, condition, and availability. New OEM pricing is an estimate based on used part costs and pricing for similar Aston Martin accessories.
Replacement Difficulty: 1/5
Replacing the cargo cover is extremely simple and requires no tools. It is a 1-person job that takes less than a minute.
Installation Steps:
- Identify the mounting slots in the rear side trim panels of the trunk.
- One end of the cargo cover assembly is spring-loaded. Press this end into one of the mounting slots.
- Compress the spring-loaded pin by pushing the assembly towards the side you just inserted.
- Align the other end with the opposite mounting slot and release. The cover will pop into place.
- Pull the cover out and retract it once to ensure it is seated correctly.
Recalls and Technical Service Bulletins (TSBs)
As of early 2026, there are no safety recalls or Technical Service Bulletins (TSBs) issued by Aston Martin specifically for the cargo cover of the 2017-2023 DB11. However, owners have reported various interior rattles, and Aston Martin has issued TSBs for some of these, such as SB-01-1066 for a door trim panel noise on certain DB11 Coupes. If you are trying to diagnose a rattle from the rear, ensure it is not coming from another source before replacing the cargo cover.
Frequently Asked Questions (FAQ)
Will this cargo cover fit my 2019 DB11 Volante convertible?
No. The cargo cover is only for the Coupe model. The Volante's convertible top mechanism occupies the space where the cover would mount, making them incompatible.
My cargo cover retracts very slowly. Can it be repaired?
Generally, no. The spring-loaded retraction mechanism is housed in a sealed roller assembly and is not designed to be serviced. If the spring fails, the entire cargo cover unit must be replaced.
How can I fix a rattle from my cargo cover?
First, ensure the cover is properly seated in its mounts. If it still rattles, you can try applying small pieces of felt tape or soft rubber grommets to the contact points on the end caps to create a tighter fit. If the end caps themselves are cracked, the unit should be replaced.
How should I clean the cargo cover material?
For dust and light dirt, use a vacuum with a soft brush attachment. For minor stains, use a high-quality automotive fabric or vinyl cleaner. Always test the cleaner on an inconspicuous area first to ensure it does not cause discoloration. Do not use harsh chemicals or abrasive brushes.
Helpful Videos
Technical Specifications
OEM Part Numbers: KY53-68870-AA
Retractable fabric/vinyl cover in a spring-loaded housing.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Aston Martin DB11:
- 🎬 Helpful Videos
- 🛍️ Shop This Part
- Key Compatibility Warning: Coupe Models Only
- Symptoms of a Failing Cargo Cover
- Buying a Used 2017-2023 DB11 Cargo Cover: What to Check
- Cost of a DB11 Cargo Cover (2017-2023)
- Replacement Difficulty: 1/5
- Recalls and Technical Service Bulletins (TSBs)
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off