2023-2024 Fisker Ocean A/C Compressor Mounting Bracket: A Buyer's Guide in a Post-Bankruptcy World
With new OEM parts nearly impossible to find due to Fisker's bankruptcy, this guide explains how to inspect and purchase a used A/C compressor mounting bracket for your 2023-2024 Ocean.
- Due to Fisker's 2024 bankruptcy, new OEM parts are largely unavailable, making used parts from reputable recyclers the most practical option.
- Failure of this bracket is almost always caused by collision damage, not by normal wear and tear.
- Replacement is NOT a DIY job. It requires a qualified EV technician to safely de-energize the high-voltage A/C compressor.
- When buying used, physically inspect the bracket for any cracks, bends, or damage, especially around the bolt holes. Match the OEM part number E00099816.
A Note on Fisker's Bankruptcy and Part Availability
Important Context: In mid-2024, Fisker Inc. filed for bankruptcy. This event has severely disrupted the supply of new OEM parts and dissolved the official service network. For owners of the 2023-2024 Fisker Ocean, this means that sourcing a simple structural part like an A/C compressor mounting bracket often requires turning to the used/recycled parts market. This guide is written to help you navigate this unique and challenging situation.
Symptoms of a Failing A/C Compressor Mounting Bracket
Failure of this specific bracket is uncommon and almost always the result of a front-end collision rather than wear and tear. However, if it does fail, you may notice the following symptoms. No widespread failures of this specific part have been documented, so these are based on general mechanical principles.
- Rattling or Buzzing Noises: A loud rattling, clunking, or buzzing sound from the front of the vehicle, especially when the A/C is turned on, could indicate a broken or loose bracket allowing the heavy compressor to vibrate excessively.
- Visible Damage or Misalignment: After a minor collision or impact with road debris, a visual inspection may reveal that the bracket is cracked, bent, or that the A/C compressor itself is sagging or out of position.
- Secondary A/C System Failure: If a broken bracket allows the compressor to move excessively, it can put stress on the refrigerant lines or the high-voltage electrical connector. This could lead to refrigerant leaks (loss of cooling) or electrical faults, which are much more serious issues.
Known Issues, TSBs, and Recalls
As of early 2026, there are no specific recalls or Technical Service Bulletins (TSBs) from Fisker or the NHTSA that directly concern the A/C compressor mounting bracket. The Fisker Ocean has been subject to numerous recalls and software updates for issues related to loss of power, braking, and dashboard display errors. While many owners report A/C system problems, these are frequently linked to software glitches or other components like blend door actuators, 🎬 See: Diagnosing Fisker Ocean blend door actuator problems not the mounting hardware.
Pro Tip: Before assuming a hardware failure, try resetting the A/C system via the vehicle's central touchscreen. Many owners have reported that toggling the A/C power off and on, or switching drive modes, can temporarily resolve cooling issues, indicating a software bug.
🎬 Watch: Quick tips for troubleshooting Fisker Ocean HVAC issuesBuying a Used A/C Compressor Mounting Bracket
With new parts largely unavailable, a used OEM bracket is the most realistic option. Here’s what to look for to ensure you get a good part.
Physical Inspection is Key
Since these brackets typically only fail from physical impact, a thorough visual inspection is your most important tool.
- Check for Cracks: Carefully examine the entire bracket, paying close attention to the areas around the bolt holes and at any bends or welds. Hairline cracks can be difficult to see but will lead to complete failure down the road.
- Look for Bends or Warping: Lay the bracket on a flat surface to check for any bending or twisting. A warped bracket will not align properly, making installation impossible and putting stress on the compressor.
- Inspect Bolt Holes: Ensure the bolt holes are round and not elongated or damaged. Damaged holes suggest the part was loose or came from a severe impact.
- Confirm Part Number: The known OEM part number for this bracket is E00099816. Match this number to ensure you are buying the correct part for your vehicle.
Why Used OEM is Your Best Bet
For a simple, non-wear item like a bracket, a used OEM part from a reputable automotive recycler is an excellent choice. It was made to Fisker's original specifications for fit and material strength. Given the vehicle's newness, even a used bracket will have very little exposure to the elements. There are no known aftermarket options for this part, making used OEM the only viable alternative to a new part that is likely unavailable.
| Part Type | Estimated Cost | Availability |
|---|---|---|
| New OEM | Unknown | Very Low / Unavailable |
| New Aftermarket | $0 | None Known |
| Used OEM | $50 - $100 | Good (from recyclers) |
| Shop Labor (Bracket Only) | $150 - $300 | N/A |
Note: Labor costs are for replacing the bracket only and assume the A/C compressor and system are otherwise functional. Costs can vary significantly by location and shop.
Installation Details and Difficulty
Warning: High-Voltage System. The A/C compressor in the Fisker Ocean is a high-voltage component. Replacement of the compressor or its bracket requires the vehicle's high-voltage system to be properly de-energized by a qualified technician with specific EV training. This is not a DIY repair. Attempting to work on this system without proper training and equipment can result in severe injury or death.
- Installation Difficulty: 4/5 (Due to high-voltage safety requirements)
- Process: A technician will first need to safely power down the high-voltage system. They will then typically need to recover the A/C system's refrigerant. Once the system is safe, the compressor can be unbolted from the old bracket, the old bracket removed from the chassis, and the process reversed with the new bracket. Finally, the A/C system must be vacuumed and recharged with the correct amount of refrigerant.
Frequently Asked Questions (FAQ)
Is this bracket the same for all Fisker Ocean trims (Sport, Ultra, Extreme, One)?
It is highly likely that this bracket is the same across all trim levels, as the A/C compressor it holds is a standard component. However, it is always best practice to verify compatibility by matching the OEM part number (E00099816) with the part you are purchasing.
Why would my original bracket need to be replaced?
The most common reason for failure is damage from a front-end collision or a significant impact from road debris. These brackets are robust and not considered a 'wear and tear' item, so spontaneous failure is extremely rare.
Can I install this bracket myself?
No. While the bracket itself is just a piece of metal, accessing it requires disconnecting the high-voltage electric A/C compressor. This procedure is dangerous and must be performed by a qualified technician trained to work on electric vehicles.
Where can I get my Fisker Ocean serviced now that the company is bankrupt?
Many independent repair shops, particularly those with EV certification and experience, are willing to work on these vehicles. For a repair like this, any competent auto A/C shop that is also certified for EV service should be able to perform the work, especially if you supply the replacement part.
🎬 Watch: How to get Fisker service after bankruptcyHelpful Videos
Technical Specifications
OEM Part Numbers: E00099816
Material: Metal alloy (specific type not documented). Designed to mount the electric A/C compressor on the 2023-2024 Fisker Ocean.
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Fisker Ocean:
- 🎬 Helpful Videos
- A Note on Fisker's Bankruptcy and Part Availability
- Symptoms of a Failing A/C Compressor Mounting Bracket
- Known Issues, TSBs, and Recalls
- Buying a Used A/C Compressor Mounting Bracket
- Physical Inspection is Key
- Why Used OEM is Your Best Bet
- Installation Details and Difficulty
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off